Derbyshire · England
Bath Repair for Bole Hill homes
Bath repair for Bole Hill, without a refit. Send us photos for a fixed quote, then we come to you.
- Repairs from £95
- Cracks in an acrylic bath
- Scratches you can feel with a fingernail
Bath repair at your home in Bole Hill
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. Our technicians work on roll-top & freestanding, cast iron enamel and whirlpool & spa baths, and the jobs we see most are impact holes in acrylic and hairline or through cracks in acrylic.
All our work comes with a one-year guarantee, wherever you are in Derbyshire.
- Where
- Bole Hill (S42)
- Region
- Derbyshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
Most damage we see is avoidable. A few tips:
- Cover the bath during DIY or decorating
- Give the bath a quick rinse after use
- Stick to mild cleaners and a soft cloth
- Keep abrasive pads and gritty cleaners away from the bath
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
When a repair isn’t the answer
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
- Cracks in acrylic we cannot reach from underneath
Send us pictures and we’ll tell you honestly.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
FAQs for Bole Hill
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote.
Can you repair a crack in an acrylic bath?
Usually, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is a holed acrylic bath repairable?
Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
What bath repair costs
Repairs from £95. We charge the same across the UK, including Bole Hill. The price reflects:
- The material and finish
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before you book.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what helps:
- Something in shot to show the size
- A clear, close picture of the problem area
- A photo taken from further back
- Any earlier repairs or coatings
For a price in Bole Hill, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Landlord and trade work in Bole Hill
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
How it works
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, depending on the damage, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Let the surface dry out before the visit
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
Getting a price
To get a price, send a couple of pictures using our quote form or ring us. We will say immediately if a repair is the right fix.
Advice
Bole Hill and the surrounding area
Bole Hill is about 4 miles south of Chesterfield, in Derbyshire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Bole Hill is one of 532 places in Derbyshire where we work. We work right across the region, from Bole Hill to Manchester (37 miles away).
Our visits in S42 are booked in the same way as anywhere else. From Press Lane and Bolehill Lane or a nearby road, we can come to you. Close by, we cover Press (1 mile south-east), Northedge (1 mile south-west), Hardwick Wood (1 mile north-east), Alton (1 mile south) and Farhill (1 mile south). Within a short drive, we also cover Chesterfield (4 miles north), Belper (11 miles south), Heanor (13 miles south), Dronfield (8 miles north), Ripley (10 miles south) and Bolsover (8 miles north-east).
Landmarks near Bole Hill
Around Bole Hill, we work in homes near Tupton Hall School and Deer Park Primary School. The nearest railway station is Chesterfield station, about 4 miles north. Other landmarks nearby include Clay Cross Hospital (2.4 miles south-east) and Clay Cross Urban District (2.3 miles south-east). Open spaces near Bole Hill include Beeley Moor.
Also near Bole Hill
What else we do in Bole Hill
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Signs you need bath repair in Bole Hill
Glass and heavy bottles cause more chips than anything else. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
These are the problems we’re asked about most:
- Cracks in an acrylic bath
- Chips on the rim or sides
- Chips caused by builders
- A failed DIY repair that is discoloured or lifting
Comparing quotes
- What protection goes down before work starts
- When it can be used again
- What the guarantee covers, and for how long
- Whether the price is fixed and includes VAT
Can I fix it myself?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
