East Riding of Yorkshire · England
Bath chip & crack repair in Anlaby Common, East Riding of Yorkshire
Bath repair in Anlaby Common without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Repairs from £95
- A chipped rim or side
- Hairline or through cracks in acrylic
How the visit works
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and we leave the room as we found it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Read more
Bath repair in Anlaby Common without replacing anything
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. Our repair technicians work on acrylic, pressed steel enamel and roll-top & freestanding, and people most often call us about a cracked acrylic bath and chips along the edge of the bath.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Anlaby Common (HU4, HU5, HU10)
- Region
- East Riding of Yorkshire
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What else we do in Anlaby Common
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why Anlaby Common clients choose us
- We come to you, anywhere in the UK
- Fixed prices from your photos
- Rooms protected and left tidy
- Everything repaired in place
Read our full price list and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Our work in Anlaby Common
Anlaby Common is about 2 miles north-east of Hessle, in East Riding of Yorkshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. We work in 299 places across East Riding of Yorkshire, from the larger towns to small villages. You can also see our page for Leeds, about 47 miles away.
Postcode districts we cover here: HU4, HU5 and HU10. That includes homes on Hull Road, Orchard Road and Grimston Road and the roads around them. Other places close to Anlaby Common include East Ella (1 mile east), Anlaby Park (1 mile south), Anlaby (1 mile west), Willerby (1 mile north-west) and Kirk Ella (2 miles west). Within a short drive, we also cover Beverley (7 miles north), Hornsea (15 miles north-east), Market Weighton (13 miles north-west), Brough (6 miles west), Hedon (9 miles east) and South Cave (8 miles west).
Near you in Anlaby Common
In Anlaby Common, that means homes near Pickering Park, Acre Heads Primary School and The Highway pub. Other local landmarks include St. Mark (within half a mile south-west), Sirius Academy West (0.9 miles south) and The Educational Hearing Service for Hearing and Vision (1.3 miles south-east). For rail, the closest station is Cottingham station, about 2.4 miles north. Further afield, we also cover the area around St Stephen's (2.8 miles east) and Hull and East Riding Hospital (1.1 miles south-west). Green spaces nearby include Far Ings National Nature Reserve.
Questions from Anlaby Common
Can you quote from photos?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
Will the repair show?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
Can you repair a crack in an acrylic bath?
Normally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Is a repair better than a new one?
Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
How do I get a price for bath repair in Anlaby Common?
Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your HU4 postcode.
Can rust on a bath be repaired?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Are there extra charges for Anlaby Common?
There is no separate call-out charge. The fixed price covers the visit and the work.
For landlords and businesses
If you manage property in Anlaby Common, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
Landlords, letting agents and housing providers in Anlaby Common use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What we cannot put right
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- A bath worn all over, where resurfacing makes more sense
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Rinse the bath after use, especially in hard water areas
- Keep abrasive pads and gritty cleaners away from the bath
- Get any new chip repaired before it rusts
- Clean with warm water and a mild detergent
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
How we price bath repair
Prices start from £95. We give every job a fixed quote from pictures. These are the things that affect it:
- What the surface is made of
- Access to the area
- How much damage there is
- Whether it’s a chip, crack, burn or wear
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- Details of any past repairs
- Something in shot to show the size
- One picture of the whole bath
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
