Glasgow · Scotland
Bath Repair in Anniesland
Bath repair across Anniesland and nearby, done in a single visit in most cases.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips along the edge of the bath
About our bath repair in Anniesland
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can generally use the bath the next day. We work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and people most often call us about damage done while the bathroom was being fitted and rusty patches near the plughole.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Location
- Anniesland (G13, G12, G14)
- Region
- Glasgow
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Anniesland
People often assume a cracked or chipped bath has to come out. Normally it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. Our prices are the same across the UK, so there is no premium for Anniesland. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- A fixed quote before booking
- No extra charge for your area
- Work done at your home or business
- We will tell you if it’s not worth repairing
Read our prices page or guide to resurfacing and replacement costs.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair won’t do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A steel bath rusted through
- Cracks in acrylic we can’t reach from underneath
Send us photos and we’ll tell you honestly.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
Anniesland and nearby
Anniesland is about 2 miles south of Bearsden, in Glasgow. Jobs in Anniesland are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Anniesland is one of 183 towns and villages in Glasgow where we work.
Here we cover the G13, G12 and G14 postcode area. From Crow Road, Fern Lane and Ryvra Road or a nearby road, we can come to you. With the A82 close by, Anniesland is easy for our technicians to reach. Other places close to Anniesland include Anniesland Cross (1 mile east), Temple (1 mile north-east), Knightswood (1 mile north-west), Netherton (1 mile north) and Jordanhill (1 mile south-west). Further out, we also cover Glasgow (3 miles south-east), Garnethill (3 miles south-east), Anderston (3 miles south-east), Calton (5 miles south-east), Blythswood Hill (3 miles south-east) and Langside (5 miles south-east).
Landmarks near Anniesland
Our customers here include homes close to The Esquire House, Victoria Park and Jordanhill College. Nearby too are Scotstoun Primary School (0.9 miles south-west), Jordanhill Parish Church (under half a mile south) and Knightswood Secondary School (within half a mile west). There is a railway station in Anniesland itself: Anniesland station. Other landmarks nearby include Braehead (1.6 miles south-west) and Glasgow Museum of Transport (2 miles south-east). Open spaces near Anniesland include Castle Hill and Kilmardinny.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Keep metal cans and razors off the surface
- Give the bath a quick rinse after use
- Protect the bath with a towel when doing jobs nearby
- Keep abrasive pads and gritty cleaners away from the bath
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a morning or an afternoon. If we find something your photos didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Related advice
Anniesland: your questions answered
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What affects the price in Anniesland
Repairs from £95. You will not pay by the hour. The price is based on:
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- Whether we combine several jobs
- How many areas need work
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Details of any past repairs
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Something in shot to show the size
Send us photos of the damage and one of the whole item, with your G13 postcode, and we will come back with a fixed quote.
Towns and villages near Anniesland
What else we do in Anniesland
About our accreditations · Every repair comes with a one-year guarantee.
