Glasgow · Scotland
Bath chip & crack repair in Temple, Glasgow
Bath repair in Temple without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips on the rim or sides
Bath repair in Temple, done in place
You do not need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. Our repair technicians work on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and people most often call us about chips on the rim or sides and snagging damage from a refit.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Location
- Temple (G13, G12, G61)
- Area hub
- Glasgow
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Temple
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Which areas do you work in?
All of Glasgow, and the rest of the UK. Travel is included in the price.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
- Ensure an acrylic bath is firm underfoot
- Protect the bath with a towel when doing jobs nearby
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Should you replace it?
Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Why Temple clients choose us
- Straight answers about what a repair can do
- Technicians who travel to you, UK-wide
- Fixed prices from your pictures
- One visit for most repairs
See our prices page and resurfacing vs replacement cost guide.
Signs you need bath repair in Temple
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
If you can see any of these, send us a photo:
- A failed DIY repair that is discoloured or lifting
- Scratches you can feel with a fingernail
- Damage beneath the taps
- Damage done while the bathroom was being fitted
Comparing quotes
- Whether the colour is mixed to match
- Whether the price is fixed and includes VAT
- How long the guarantee is and what it covers
- What preparation is included
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair will not do:
- A bath that moves underfoot, until its support is fixed
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Our work in Temple
Temple is about 3 miles north-east of Renfrew, in Glasgow. Clients in Temple get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Temple is one of 183 towns and villages in Glasgow we cover.
Our repair technicians cover all of the G13, G12 and G61 postcode area. Jobs here include addresses on Fern Lane, Ilay Road and Ryvra Road. Main roads around Temple include the A82, so getting to you is simple. We also cover the places around Temple: Anniesland Cross (1 mile south), Anniesland (1 mile south-west), Netherton (1 mile north), Knightswood (1 mile west) and Kelvindale (1 mile east). Within a short drive, we also cover Glasgow (3 miles south-east), Garnethill (3 miles south-east), Anderston (3 miles south-east), Calton (5 miles south-east), Blythswood Hill (3 miles south-east) and Langside (5 miles south).
Local landmarks in Temple
Our clients here include homes close to Dawsholm Park, Glasgow University Library and Lock 27 pub and the streets around them. Also close by are Knightswood Secondary School (0.5 miles west), All Saints Church (0.5 miles south) and Jordanhill College (0.8 miles south-west). Temple has its own railway station: Anniesland station. Further afield, we also cover the area around Glasgow Museum of Transport (2.1 miles south-east) and Partick Castle (1.9 miles south-east). For a walk, there’s Kilmardinny and Castle Hill.
How it works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to care for it.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
Get a quote
Most clients in Temple get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Landlords, agents and businesses in Temple
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Nearby places to Temple
What else we do in Temple
About our accreditations · Every repair comes with a one-year guarantee.
