Barnsley · England
Bath Repair in Athersley
Problem with your bath in Athersley? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Rust by the waste and overflow
- Cracks in an acrylic bath
About our bath repair in Athersley
A typical bath repair is a few hours’ work, and you can typically bathe again the day after. You will not need a plumber or tiler, because nothing is disconnected. We work on pressed steel enamel, cast iron enamel and whirlpool & spa baths, and the jobs we see most are rusty patches near the plughole and chips along the edge of the bath.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Athersley (S71, S75)
- Area hub
- Barnsley
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Athersley
Athersley is about 2 miles north of Barnsley, in Barnsley. Our technicians come to customers in Athersley and nearby villages, so you don’t need to take anything anywhere. Athersley is one of 94 places in Barnsley we cover. You can also see our page for Leeds, about 16 miles away.
Jobs in S71 and S75 work the same way as everywhere else we cover. You will find streets such as Denby Road, Park Avenue and Wensley Road, all of which we cover. Athersley is on the A61, so it’s easy for us to reach. We also cover the places around Athersley: Smithies (1 mile south-east), Old Town (1 mile south), Honeywell (1 mile south), Carlton (1 mile north-east) and Royston (2 miles north-east). We also work in nearby towns such as Wombwell (5 miles south-east), Wath upon Dearne (7 miles south-east), Hoyland (6 miles south), Worsbrough (3 miles south), Cudworth (3 miles east) and Thurnscoe (7 miles east).
Around Athersley
Our clients here include homes close to Edward Sheerien School, Laithes Primary School and St Michael's Catholic and Church of England High School and the streets around them. The closest station to Athersley is Barnsley station, roughly 1.7 miles south of the centre. Other landmarks nearby include Alhambra Shopping Centre (2 miles south) and Barnsley Hospital (1.7 miles south-west). Open spaces near Athersley include Waterton Park.
Also in Athersley
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Stick to mild cleaners and a soft cloth
- Protect the bath with a towel when doing jobs nearby
- Don’t leave a fresh chip for long
- Fix dripping taps early to stop staining and limescale
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Barnsley and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Common questions in Athersley
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Do you cover the whole of Barnsley?
We work UK-wide, and that includes Athersley. Prices do not change with location.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
What happens once I’ve sent photos?
We review the photos and send a fixed quote with dates.
Can you repair a hole in a bath?
In most cases. Send us a picture of the hole and one from under the bath if you can.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Do you work in Athersley?
Yes, we do. Technicians travel to Athersley from across the region, and the price is the same as everywhere else.
When a repair isn’t the answer
A repair isn’t right for every job, for example:
- Wear across the whole surface, which needs re-enamelling
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
What happens on the day
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Advice
What we’re called out for in Athersley
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Clients typically contact us about:
- Snagging damage from a refit
- Rust by the waste and overflow
- Scuffs and scratches in the surface
- A hole punched through by something heavy
Questions to ask before booking
- How to care for the finish
- What protection goes down before work starts
- Who turns up on the day
- How soon you can use it again
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What bath repair costs
Prices start from £95. You will know the full cost before booking. We look at:
- Access to the area
- Whether we combine several jobs
- How hard the colour is to match
- How much damage there is
Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed quote
It only takes a minute to photograph the damage. Please include:
- One sharp close-up of the damage
- Something in shot to show the size
- A wider photo showing the whole bath
- Details of any past repairs
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Repair or replace in Athersley?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- We’ll tell you if it’s not worth repairing
- Fixed prices from your photos
- One price list for the whole UK
- Every repair guaranteed for a year
Take a look at our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
