Wrexham · Wales

Bath Repair in Bangor-is-y-coed

Our technicians come to Bangor-is-y-coed for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Deep scratches in acrylic
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Bangor-is-y-coed

How we handle bath repair in Bangor-is-y-coed

Most of our bath repairs take a few hours, and you can typically bathe again the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. We’re often asked to fix chips under the taps and rust spots around the plughole, across whirlpool & spa baths, pressed steel enamel and cast iron enamel.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Where
Bangor-is-y-coed (LL13)
Area hub
Wrexham
Warranty
One year on every repair
Quotes
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Common questions in Bangor-is-y-coed

What about rust by the waste?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Is a holed acrylic bath repairable?

Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.

How long before I can use the bath?

Normally by the following day, though it depends on what we’ve done.

What happens after I send photos?

We review the photos and send a fixed quote with dates.

Do the materials smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Can you match an avocado or pink bath?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.

What affects the price in Bangor-is-y-coed

Repairs from £95. You’ll know the full cost before you book. We look at:

  • Any earlier repairs that need removing first
  • How hard the colour is to match
  • How much damage there is
  • What the surface is made of

Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Quotes from your pictures

We price nearly every job from photos. This is what we need:

  • What it’s made of, if you know
  • Where you are, by postcode
  • A coin or ruler next to the damage for scale
  • A close-up of the damage, in focus

For a price in Bangor-is-y-coed, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Why repair rather than replace?

Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

What you get with us

  • Work done at your home or business
  • Most jobs done in one visit
  • Honest advice, even when it means no job
  • One price list for the entire UK

Read our full price list or resurfacing vs replacement cost guide.

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Signs you need bath repair in Bangor-is-y-coed

Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.

Signs it’s time to call us include:

  • A kit repair that didn’t last
  • Damage done while the bathroom was being fitted
  • Rust spots around the plughole
  • Holes from dropped items

Comparing quotes

  • Whether they match the colour on site
  • How to look after the finish
  • Who will actually do the work
  • What protection goes down before work starts

Choosing a repair company

What a repair can’t fix

We’ll always be straight with you, so here’s what a repair will not do:

  • A steel bath rusted through
  • Cracks in acrylic we cannot reach from underneath
  • Wear across the whole surface, which needs re-enamelling

Not sure? Send photos and we’ll give you a straight answer before you book.

What we work on

  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths

Keeping it looking good

Much of the damage we repair could have been avoided. These habits help:

  • Stick to mild cleaners and a soft cloth
  • Get any new chip repaired before it rusts
  • Ensure an acrylic bath is firm underfoot
  • Keep abrasive pads and gritty cleaners away from the bath

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.

Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

Can I fix it myself?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Our work in Bangor-is-y-coed

Bangor-is-y-coed (Welsh: Bangor-on-Dee) is about 5 miles south-east of Wrexham, in Wrexham. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Bangor-is-y-coed is one of 115 towns and villages in Wrexham where we work. You can also see our page for Liverpool, about 28 miles away.

All of LL13 is within our area. That includes homes on Station Road, High Street and Sandown Close. If you’re just outside Bangor-is-y-coed, we cover Sesswick (1 mile north-west), Cross Lanes (1 mile north-west), Bedwell (2 miles west), Cock Bank (2 miles west) and Pentre Maelor (2 miles north-west). We also work in nearby towns such as Wrexham (5 miles north-west), Caia Park (4 miles north-west), Offa (5 miles north-west), Rhosllannerchrugog (6 miles west), Rhosddu (5 miles north-west) and Acton (5 miles north-west).

Landmarks near Bangor-is-y-coed

In Bangor-is-y-coed, that means homes near St Dunawd's Church, The Stableyard pub and Ysgol Sant Dunawd. Bangor-is-y-coed’s nearest station is Wrexham Central station, roughly 4.8 miles north-west of the centre. Further afield, we also cover the area around Penley Community Hospital (3.8 miles south-east) and Overton Castle (2.5 miles south-west).

Map of Bangor-is-y-coed © OpenStreetMap contributors

The process

We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes two to three hours for most chips. At the end we talk you through the curing time and the aftercare.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Let the surface dry out before the visit
  • Keep a parking space free if you can
  • Let us know which floor the room is on

Get a quote

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Send photos for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.