Wrexham · Wales

Bath chip & crack repair in Bedwell, Wrexham

Bath repair across Bedwell and nearby, done in a single visit in most cases.

  • Repairs from £95
  • A chipped rim or side
  • A failed DIY repair that’s discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Bedwell

How the visit works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We clean up when we’re done and let you know when you can use it again.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, usually the next day.

How to prepare

  • Make sure the room can be ventilated
  • Plan for the room to be out of bounds to pets and children
  • Have somewhere for us to park nearby if possible

Get a quote

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Get a fixed price

Read more

Bath repair at your home in Bedwell

Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. Typical jobs include a cracked acrylic bath and rust spots around the plughole, across roll-top & freestanding, whirlpool & spa baths and cast iron enamel.

Whatever the size of the job, it’s backed by a one-year guarantee in Bedwell and across Wrexham.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Location
Bedwell (LL13)
Area hub
Wrexham
Guarantee
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

Repairing versus replacing in Bedwell

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Why Bedwell customers choose us

  • We’ll tell you if it’s not worth repairing
  • Work done at your home or business
  • No need to remove anything
  • One-year guarantee on every repair

Read our pricing and resurfacing vs replacement cost guide.

Bedwell questions

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.

Is there any odour?

Expect a mild smell while we’re working.

What about rust by the waste?

Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.

Is it worth repairing rather than replacing?

Generally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

How do I get a price for bath repair in Bedwell?

Prices start from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.

How do I book?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you repair something that is been repaired before?

Yes, we often do. It can add a little time, which we include in the quote.

About Bedwell

Bedwell is about 3 miles south of Caia Park, in Wrexham. Wherever you are in the LL13 postcode area, we carry out the work at your property. Bedwell is one of 115 places in Wrexham we cover. Our nearest city page is Liverpool, about 27 miles away.

Our technicians cover all of LL13 and the streets around it. Close by, we cover Cock Bank (1 mile south-west), Marchwiel (1 mile north), Cross Lanes (1 mile north-east), Sesswick (1 mile north-east) and Pentre Maelor (2 miles north). Within a short drive, we also cover Wrexham (3 miles north-west), Caia Park (3 miles north), Offa (3 miles north-west), Rhosllannerchrugog (4 miles west), Rhosddu (3 miles north-west) and Acton (4 miles north).

What’s near Bedwell

In Bedwell, that means homes near Church Of SS Marcella and Deiniol, Cross Lanes Hotel & Brasserie and Eyton CIW Voluntary Controlled Primary School and the streets around them. The nearest railway station is Wrexham Central station, about 3.2 miles north-west of the centre. A little further out are Tŷ Pawb (3 miles north-west) and Erddig Museum (2.6 miles north-west). For a walk, there is Monks Pool and Bryn-y-hafod.

Map of Bedwell © OpenStreetMap contributors

Work for landlords and builders

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

What a repair can’t fix

To be straight with you, there are a few things a repair will not fix:

  • A steel bath rusted through
  • Wear across the whole surface, which needs re-enamelling
  • Cracks in acrylic we can’t reach from underneath

If in doubt, send photos and we will say what we think before booking.

What we work on

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel
  • Acrylic
  • Roll-top & freestanding

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.

When to call us in Bedwell

Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.

Most people get in touch after spotting one of these:

  • Damage beneath the taps
  • A cracked acrylic bath
  • An old repair that has yellowed or come loose
  • Chips caused by builders

What to look for in a quote

  • How the colour is matched
  • What aftercare is recommended
  • What preparation is included
  • Who turns up on the day

10 questions to ask before you book

Keeping it looking good

Nothing complicated is needed:

  • Give the bath a quick rinse after use
  • Put a towel in the bath if you’re working above it
  • A dripping tap stains enamel, so fix it early
  • Get any new chip repaired before it rusts

A repaired bath needs no special treatment. Skip bleach and gritty creams and rinse after use.

Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.