North Somerset · England
Bath Repair in Banwell
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Banwell, with a one-year guarantee on every repair.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Deep scratches in acrylic
About our bath repair in Banwell
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We’re frequently asked to fix cracks in an acrylic bath and a chipped rim or side, on cast iron enamel, pressed steel enamel and roll-top & freestanding.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Where
- Banwell (BS29)
- Area hub
- North Somerset
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and we start. Allow a few hours, depending on the damage, and we’ll tell you if anything changes.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Why repair rather than replace?
People often assume a cracked or chipped bath has to come out. Normally it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Why Banwell customers choose us
- Dust sheets down, tidy finish
- One price list for the entire UK
- Colour-matched on site
- Every repair guaranteed for a year
See our prices page and resurfacing vs replacement cost guide.
What we’re called out for in Banwell
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
The things customers usually mention when they call include:
- Deep scratches in acrylic
- Damage beneath the taps
- Hairline or through cracks in acrylic
- A kit repair that didn’t last
What to look for in a quote
- Whether the price is fixed and includes VAT
- How long it needs to cure
- How changes to the job are handled
- The length of the guarantee and what it covers
Questions from Banwell
How long before I can use the bath?
Most baths can be used the next day. We confirm the time before we leave.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Is a cracked acrylic bath repairable?
Typically, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
What happens once I’ve sent pictures?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Our work in Banwell
Banwell is about 4 miles south-east of Weston-super-Mare, in North Somerset. Whether you’re in the middle of Banwell or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover all 86 towns and villages in North Somerset.
Every address in BS29 is covered, from the main roads to the quietest streets. We regularly work on streets such as High Street, Westfield Crescent and Queens Road and the roads around them. Close by, we cover Towerhead (1 mile east), Christon (1 mile south-west), Barton (2 miles south), Woolvershill Batch (2 miles north-west) and Sandford (2 miles east). Within a short drive, we also cover Weston-super-Mare (4 miles north-west), Portishead (12 miles north), Clevedon (7 miles north), Nailsea (8 miles north-east), Milton (4 miles north-west) and Yatton (5 miles north-east).
Near you in Banwell
Locally, our jobs take us to homes close to Ship Inn, Church of St Andrew and Banwell Primary School. The nearest railway station is Worle station, roughly 2.6 miles north-west of the centre. Nearby you’ll also find Banwell Museum (less than half a mile east) and Weston General Hospital (4.3 miles west). Open spaces near Banwell include Kingswood and Wavering Down.
Landlords, agents and businesses in Banwell
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Also in Banwell
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t scrub with anything abrasive
- Don’t leave razors or cans standing in the bath
- Give the bath a quick rinse after use
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
What bath repair costs
Repairs from £95. We give every job a fixed quote from pictures. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- The material and finish
- The size and number of damaged areas
We charge the same wherever you are, so there’s no premium for Banwell. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
When a repair isn’t the answer
A repair is not right for every job, including:
- A steel bath rusted through
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath worn all over, where resurfacing makes more sense
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
