North Somerset · England
Bath chip & crack repair in Towerhead, North Somerset
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Towerhead and across North Somerset. Send pictures for a free, fixed quote.
- Repairs from £95
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
How we handle bath repair in Towerhead
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. Our repair technicians work on cast iron enamel, whirlpool & spa baths and pressed steel enamel, and the jobs we see most are deep scratches in acrylic and damage beneath the taps.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Towerhead (BS29)
- County
- North Somerset
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Towerhead
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
Signs it’s time to call us include:
- An old repair that has yellowed or come loose
- Hairline or through cracks in acrylic
- A chipped rim or side
- Damage done while the bathroom was being fitted
What your quote should include
- What preparation is included
- Is the price fixed, and does it include VAT?
- Who turns up on the day
- How to care for the finish
Towerhead and the surrounding area
Towerhead is about 4 miles east of Weston-super-Mare, in North Somerset. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. We cover all 86 towns and villages across North Somerset, from the larger towns to small villages.
We cover every part of the BS29 postcode area and the streets around it. Other places close to Towerhead include Sandford (1 mile east), Banwell (1 mile west), Winscombe (1 mile south-east), Nye (1 mile north) and Sidcot (2 miles south-east). We also work in nearby towns such as Weston-super-Mare (4 miles west), Portishead (11 miles north), Clevedon (7 miles north), Nailsea (8 miles north-east), Milton (5 miles north-west) and Yatton (4 miles north).
Landmarks near Towerhead
In Towerhead, that means homes near Railway Inn, Banwell Primary School and Church of St Andrew, among other places. For rail, the closest station is Worle station, roughly 3.3 miles north-west. Nearby you will also find Banwell Museum (0.7 miles west) and Banwell Castle (0.6 miles south-west). For a walk, there is Kingswood and Wavering Down.
What we can’t put right
We will not take on work that won’t last, so here’s what a repair can’t put right:
- A bath that moves underfoot, until its support is fixed
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath worn all over, where resurfacing makes more sense
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Towerhead
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Protect the bath with a towel when doing jobs nearby
- Fix dripping taps early to stop staining and limescale
- Keep abrasive pads and gritty cleaners away from the bath
- Stick to mild cleaners and a soft cloth
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
Prices and what affects them
Repairs from £95. We give every job a fixed quote from pictures. This is what makes a difference:
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- The material
- Unusual colours or finishes
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- One sharp close-up of the damage
- The material, if you know it
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Towns and villages near Towerhead
Other services in Towerhead
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
The process
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take two to three hours for most chips.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the day after.
Before we arrive
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
How to get a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
Landlords, agents and businesses in Towerhead
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Towerhead as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
FAQs for Towerhead
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Can you repair something that is been repaired before?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
About our accreditations · Every repair comes with a one-year guarantee.
