Somerset · England
Bath Repair in Christon
Bath repair in and around Christon: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- Chips under the taps
How to look after the repair
Once the work has cured, treat it gently:
- Check that an acrylic bath doesn’t move when you stand in it
- Use a soft cloth and washing-up liquid for everyday cleaning
- Do not scrub with anything abrasive
- A dripping tap stains enamel, so fix it early
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
Bath repair in Christon without replacing anything
A typical bath repair is a few hours’ work, and the bath is back in use the next day. You will not need a plumber or tiler, because the bath doesn’t move. We regularly repair pressed steel enamel, acrylic and cast iron enamel, and people most frequently call us about an old repair that has yellowed or come loose and rust spots around the plughole.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Christon (BS26)
- Area hub
- Somerset
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Christon
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
I tried a repair kit. Can you fix it?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What areas do you cover?
Across the UK, so Christon is covered. Prices do not change with location.
What happens once I’ve sent pictures?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
How invisible is a bath repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
What we are called out for in Christon
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Signs it’s time to call us include:
- Chips caused by builders
- Rust spots around the plughole
- Chips along the edge of the bath
- An old repair that has yellowed or come loose
Before booking anyone
- Whether a trained technician does the job
- How the room is protected while they work
- If travel is included in the price
- Whether they match the colour on site
Our work in Christon
Christon is about 4 miles south-east of Weston-super-Mare, in Somerset. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 640 towns and villages in Somerset, from the larger towns to small villages.
Here we cover the BS26 postcode area. From Flagstaff Road and Christon Road or a nearby road, we can come to you. Close by, we cover Barton (1 mile east), Banwell (1 mile north-east), Woolvershill Batch (2 miles north), Towerhead (2 miles north-east) and Winscombe (3 miles east). We also work in nearby towns such as Bridgwater (14 miles south), Burnham-on-Sea (7 miles south-west), Wells (12 miles south-east), Street (15 miles south-east), Glastonbury (14 miles south-east) and Cheddar (5 miles south-east).
Local landmarks in Christon
Our customers here include homes close to Hamwood Park and Church of St Mary, among other places. The closest station to Christon is Worle station, roughly 3.3 miles north of the centre. Well-known places in the area include Weston General Hospital (3.5 miles west) and Banwell Museum (1.6 miles north-east). Not far away are Wavering Down and Kingswood.
Other services in Christon
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why Christon clients choose us
- Honest advice, even when it means no job
- No need to remove anything
- Colours mixed by hand to suit your surface
- Free fixed quotes from pictures
Read our pricing and resurfacing vs replacement cost guide.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
What happens on the day
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a few hours. We tidy up before we leave and tell you when it’s ready to use.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Open a window if you can
- Keep children and pets away from the room on the day
- Clear the area around the damage
Getting a price
Most clients in Christon get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Related advice
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
