North Somerset · England
Bath chip & crack repair in Barton, North Somerset
Bath repair across Barton and nearby, usually in one visit.
- Repairs from £95
- A chipped rim or side
- A hole punched through by something heavy
About our bath repair in Barton
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. If you’re dealing with a failed DIY repair that’s discoloured or lifting and chips under the taps, we can help, on acrylic, cast iron enamel and pressed steel enamel alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Barton (BS25)
- County
- North Somerset
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
How we price bath repair
Repairs from £95. There’s no charge for travel to Barton. The price comes down to:
- How much damage there is
- Unusual colours or finishes
- The material
- What kind of damage it is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- What it’s made of, if you know
- One sharp close-up of the damage
- Where you are, by postcode
- Details of any past repairs
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Repair or replace in Barton?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- A fixed quote before you book
- We’ll tell you if it’s not worth repairing
Read our full price list or resurfacing vs replacement cost guide.
Your questions about bath repair in Barton
Are there extra charges for Barton?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Which areas do you work in?
The entire UK, including all of North Somerset. Send your postcode with your photos and we will confirm dates.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Barton and nearby
Barton is about 5 miles south-east of Weston-super-Mare, in North Somerset. Jobs in Barton are booked in like any other job: a fixed price from your photos, then a visit to do the work. We work in all 86 towns and villages in North Somerset.
All of BS25 is within our area. If you’re just outside Barton, we cover Christon (1 mile west), Banwell (2 miles north), Winscombe (2 miles east), Towerhead (2 miles north-east) and Sidcot (2 miles east). Further out, we also cover Weston-super-Mare (5 miles north-west), Portishead (13 miles north), Clevedon (9 miles north), Nailsea (10 miles north-east), Milton (5 miles north-west) and Yatton (6 miles north).
Local landmarks in Barton
In Barton, that means homes near Church of St Andrew and Hamwood Park, among other places. The closest station to Barton is Worle station, roughly 4 miles north-west of the centre. Other landmarks nearby include Banwell Museum (1.5 miles north) and Banwell Castle (1.3 miles north-east). Open spaces near Barton include Wavering Down and Kingswood.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Landlord and trade work in Barton
We work for landlords, letting agents and housing providers in Barton as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
What a repair can’t fix
A repair is not always the answer, and we will tell you before we start. We cannot fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we can’t get to from below
Send us photos and we’ll tell you honestly.
Materials we work on in Barton
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Also in Barton
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a few hours, depending on the damage. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Ensure the room can be ventilated
- Tell us about parking, stairs or access
- Let the surface dry out before the visit
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
Aftercare tips
To keep it looking its best for years:
- Clean with warm water and a mild detergent
- If an acrylic bath flexes, have its feet adjusted
- Don’t scrub with anything abrasive
- Give the bath a quick rinse after use
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
About our accreditations · Every repair comes with a one-year guarantee.
