Kent · England
Bath Repair in Bishopsbourne
Our repair technicians come to Bishopsbourne for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Scuffs and scratches in the surface
- Rust spots around the plughole
How we handle bath repair in Bishopsbourne
A damaged bath doesn’t have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. We’re frequently asked to fix chips under the taps and a kit repair that didn’t last, on acrylic, cast iron enamel and roll-top & freestanding.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Bishopsbourne (CT4)
- County
- Kent
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
About Bishopsbourne
Bishopsbourne is about 4 miles south-east of Canterbury, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Bishopsbourne is one of 922 towns and villages in Kent we cover. Our nearest city page is London, about 56 miles away.
We cover every part of the CT4 postcode area. Whether you live on The Street, Park Lane and Crows Camp Road or anywhere nearby, we can come to you. We also travel to Kingston (1 mile south-east), Bridge (1 mile north), Out Elmstead (1 mile south-east), Marley (1 mile south) and Patrixbourne (2 miles north). Within a short drive, we also cover Ashford (13 miles south-west), Canterbury (4 miles north-west), Margate (15 miles north-east), Dover (10 miles south-east), Folkestone (10 miles south) and Ramsgate (14 miles north-east).
Landmarks near Bishopsbourne
Our customers here include homes close to The Mermaid Inn and Church of St Mary, among other places. For rail, the closest station is Bekesbourne station, roughly 2.2 miles north. A little further out are Canterbury Castle (4.1 miles north-west) and Kent and Canterbury Hospital (3.2 miles north-west).
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Have new chips seen to early
- Keep metal cans and razors off the surface
- Avoid scourers, wire wool and gritty cream cleaners
- Give the bath a quick rinse after use
Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we take into account:
- The size and number of damaged areas
- Where the damage is and how we get to it
- Doing more than one item at once
- The material and finish
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Photographing the damage takes a minute. Try to send:
- Natural light rather than flash
- The material, if you know it
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Repair or replace in Bishopsbourne?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Bishopsbourne
- One price list for the whole UK
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
Take a look at our full price list and resurfacing vs replacement cost guide.
Also near Bishopsbourne
Also in Bishopsbourne
What we can’t put right
It helps to know what we can’t do:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we will say what we think.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Common problems we fix in Bishopsbourne
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
It’s worth getting a quote if you see:
- A kit repair that didn’t last
- Chips caused by builders
- Scuffs and scratches in the surface
- Rust spots around the plughole
What your quote should include
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Bishopsbourne questions
How long does the repair take to cure?
Most baths can be used the following day. We’ll tell you the exact curing time when we finish.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Bishopsbourne.
Do you work in Bishopsbourne?
Yes. We cover the entire UK and come to Bishopsbourne and the rest of Kent. Send pictures and we’ll quote, or call 0345 017 0787.
How invisible is a bath repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
The process
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which generally takes a few hours. If anything looks different from your pictures, we will talk to you before going ahead.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the following day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Make sure the room can be ventilated
- Let us know about parking or access
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
