Perth and Kinross · Scotland
Bath Repair for Coupar Angus homes
Bath repair in Coupar Angus without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- Impact holes in acrylic
- Deep scratches in acrylic
Bath repair in Coupar Angus without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour matched so it blends in. We’re often asked to fix a cracked acrylic bath and a chip where the taps sit, on pressed steel enamel, acrylic and whirlpool & spa baths.
All of our repairs are guaranteed for twelve months in Coupar Angus and everywhere else. We return to put right any problem with the work.
- Area
- Coupar Angus (PH13)
- County
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Coupar Angus
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Do you come to Coupar Angus?
We do. We send a technician to Coupar Angus for every job, with no extra charge for travel.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
It’s been repaired before. Can you still fix it?
Typically, yes. The old repair comes out first, so mention it when you send pictures.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Repair or replace: which is better?
Many people think a damaged bath means a new one. Generally it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Coupar Angus
- Most jobs done in one visit
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
See our full price list and bath cost comparison.
Signs you need bath repair in Coupar Angus
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Signs it’s time to call us include:
- Chips under the taps
- Rusty patches near the plughole
- A failed DIY repair that’s discoloured or lifting
- Chips along the edge of the bath
What to look for in a quote
- When it can be used again
- How your room will be protected
- What preparation is included
- What happens if they find more damage
What bath repair costs
Prices start from £95. You will know the full cost before booking. We take into account:
- How many items we do on one visit
- The material
- Whether old repairs or coatings need taking off
- The type of damage
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send photos for a quote
It only takes a minute to photograph the damage. Try to send:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Any details about the material
- A clear, close picture of the problem area
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
How to care for the repair
Most damage we see is avoidable. A few tips:
- Keep metal cans and razors off the surface
- Ensure an acrylic bath is firm underfoot
- Do not leave a fresh chip for long
- Protect the bath with a towel when doing jobs nearby
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Covering Coupar Angus
Coupar Angus is about 4 miles south-east of Blairgowrie and Rattray, in Perth and Kinross. Whether you are in the middle of Coupar Angus or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Coupar Angus is one of 107 places in Perth and Kinross where we work. Our jobs stretch from Coupar Angus to Edinburgh (42 miles away).
We work across the PH13 postcode area. Whether you live on George Square, High Street and Station Road or a nearby road, we can come to you. Coupar Angus is on the A94 and A923, which makes it straightforward to reach. If you are just outside Coupar Angus, we cover Markethill (1 mile south-east), Woodside (2 miles south-west), Burrelton (2 miles south-west), Ardler (3 miles north-east) and Carsie (3 miles north-west). Within a short drive, we also cover Perth (12 miles south-west), Blairgowrie and Rattray (4 miles north-west), Letham (13 miles south-west), Scone (10 miles south-west), Tulloch (12 miles south-west) and Alyth (5 miles north).
Local landmarks in Coupar Angus
Typical jobs here are in homes near Coupar Angus, among other places. Nearby you’ll also find Blairgowrie Community Hospital (4 miles north-west) and Kinclaven Castle (4.2 miles west). Open spaces near Coupar Angus include Monk Myre and Northballo Hill.
Also near Coupar Angus
Also in Coupar Angus
What a repair cannot fix
A repair is not right for every job, for example:
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
- Wear across the entire surface, which needs re-enamelling
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which usually takes two to three hours for most chips. If we find something your pictures didn’t show, we will explain it before carrying on.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the next day.
Before we arrive
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
