Staffordshire · England
Bath chip & crack repair in Boundary, Staffordshire
Our technicians come to Boundary for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A hole punched through by something heavy
- Chips caused by builders
About our bath repair in Boundary
Most of our bath repairs take a few hours, and you can generally bathe again the following day. You won’t need a plumber or tiler, because nothing is disconnected. If you are dealing with hairline or through cracks in acrylic and rust spots around the plughole, we can help, on acrylic, cast iron enamel and whirlpool & spa baths alike.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Where
- Boundary (ST10)
- Region
- Staffordshire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Boundary
Boundary is about 2 miles west of Cheadle, in Staffordshire. From the centre of Boundary to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our repair technicians cover 512 places across Staffordshire, from the larger towns to small villages. You can also see our page for Manchester, about 35 miles away.
Our technicians cover all of the ST10 postcode area. Whether you live on Delphouse Road, The Common and Little Road or a nearby road, a technician can come to you. Neighbouring places we cover include Dilhorne (1 mile north-west), Brookhouses (1 mile east), Forsbrook (1 mile south-west), Draycott in the Moors (1 mile south) and Caverswall (2 miles west). Larger places within reach include Stafford (13 miles south), Newcastle-under-Lyme (9 miles west), Longton (4 miles west), Stone (8 miles south-west), Leek (8 miles north) and Biddulph (11 miles north-west).
Landmarks near Boundary
We visit homes around Dilhorne Endowed CE (A) Primary School, Wolstanton Grammar School and Church of All Saints, among other places. The nearest railway station is Blythe Bridge station, roughly 1.9 miles south-west. Nearby you’ll also find Cheadle Hospital (1.6 miles east) and Beswick Museum (3.3 miles west). For a walk, there is Harston Wood.
Honest limits
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
Places near Boundary
What else we do in Boundary
How we price bath repair
Prices start from £95. There’s no area surcharge for Boundary. What changes the price is:
- Unusual colours or finishes
- Doing more than one item at once
- The material and finish
- Access to the area
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
How to get a fixed price
The better the photos, the more accurate the price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Common problems we fix in Boundary
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Look out for these signs:
- Deep scratches in acrylic
- A hole punched through by something heavy
- A chipped rim or side
- A cracked acrylic bath
Questions to ask before booking
- Who will actually do the work
- What happens if the damage is worse than the pictures show
- Whether cleaning and preparation are in the price
- How the colour is matched
What happens on the day
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a few hours, and you are welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
For landlords and businesses
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Your questions about bath repair in Boundary
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
When can I have a bath again?
Most baths can be used the next day. We confirm the time before we leave.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Rinse it down after each bath
- Ensure an acrylic bath is firm underfoot
- Protect the bath with a towel when doing jobs nearby
- Get any new chip repaired before it rusts
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
