Gloucestershire · England
Bath Repair in Bredon's Hardwick
We travel to Bredon's Hardwick for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Rust by the waste and overflow
How the visit works
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. It usually takes a few hours, depending on the damage, and you’re welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Ensure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
Getting a price
The quickest way to a price is to send a couple of photos through our quote form or ring us. We will say straight away whether it can be repaired.
Read more
Bath repair at your home in Bredon's Hardwick
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. We regularly repair whirlpool & spa baths, pressed steel enamel and cast iron enamel, and the jobs we see most are a cracked acrylic bath and rust by the waste and overflow.
Every repair is covered by our one-year guarantee.
- Where
- Bredon's Hardwick (GL20)
- Region
- Gloucestershire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
What affects the price in Bredon's Hardwick
Repairs from £95. We price every job individually, from your photos. The main factors are:
- The material and finish
- How easy the damage is to reach
- Unusual colours or finishes
- Previous DIY repairs that have to come out
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- Any details about the material
- The postcode, so we can plan the visit
- Details of any past repairs
- A clear, close picture of the problem area
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Your questions about bath repair in Bredon's Hardwick
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Bredon's Hardwick.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we will plan for it.
How long does the repair take to cure?
Normally by the following day, though it depends on what we have done.
Are there extra charges for Bredon's Hardwick?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we will ask.
Do you need bath repair in Bredon's Hardwick?
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
The most common problems we are called about are:
- An old repair that has yellowed or come loose
- Chips on the rim or sides
- Scratches you can feel with a fingernail
- A hole punched through by something heavy
What to look for in a quote
- Whether a trained technician does the job
- How your room will be protected
- When it can be used again
- Whether there are any call-out or travel charges
Covering Bredon's Hardwick
Bredon's Hardwick is about 2 miles north of Tewkesbury, in Gloucestershire. Wherever you are in the GL20 postcode area, we come to you. Bredon's Hardwick is one of 470 towns and villages in Gloucestershire where we work. Our nearest city page is Birmingham, about 33 miles away.
Our repair technicians cover all of GL20 and the streets around it. From Tewkesbury Road and Hardwick Bank Road or a nearby road, a technician can come to you. Other places close to Bredon's Hardwick include Northway (1 mile south-east), Bredon (1 mile north-east), Mitton (1 mile south-west), Twyning (1 mile north-west) and Church End (1 mile west). Larger places within reach include Cheltenham (8 miles south), Gloucester (12 miles south), St Paul's (8 miles south), Lansdown (9 miles south), Bishop's Cleeve (5 miles south-east) and Fairview (8 miles south).
What’s near Bredon's Hardwick
Typical jobs here are in homes near Carrant Brook Junior School, Tewkesbury Academy and Church of St Giles, among other places. The nearest railway station is Ashchurch for Tewkesbury station, about 1.5 miles south-east. A little further out are Tewkesbury Heritage & Visitor Centre (2.1 miles south-west). Not far away are Beckford Nature Reserve and Bredon Hill.
Aftercare tips
After the repair has cured, a few habits help it last:
- Rinse the bath after use, especially in hard water areas
- If an acrylic bath flexes, have its feet adjusted
- Stick to mild cleaners and a soft cloth
- Don’t leave razors or cans standing in the bath
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Nearby places to Bredon's Hardwick
More services for Bredon's Hardwick
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What we can’t put right
We will not take on work that won’t last, so these are the limits:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Work for landlords and builders
If you manage property in Bredon's Hardwick, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
