Gloucestershire · England
Bath Repair in Mitton
Local bath repair for Mitton: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Impact holes in acrylic
- Scratches you can feel with a fingernail
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Bath repair in Mitton, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Whether it’s a chip where the taps sit and snagging damage from a refit, we can normally put it right, on cast iron enamel, whirlpool & spa baths and acrylic alike.
All our work is covered by our one-year guarantee, wherever you are in Gloucestershire.
- Where
- Mitton (GL20)
- Area hub
- Gloucestershire
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Mitton
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you cover the whole of Gloucestershire?
Everywhere in the UK, Mitton included. There’s no extra charge for travel.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
How do I get a price for bath repair in Mitton?
Repairs from £95. We give a fixed quote from your photos. Send a close-up and a picture of the whole item and your postcode.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Mitton and the surrounding area
Mitton is about 1 mile north of Tewkesbury, in Gloucestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 470 towns and villages in Gloucestershire. We work right across the region, from Mitton to Birmingham (34 miles away).
Postcode districts we cover here: GL20. We regularly work on streets such as Bredon Road, Hawser Road and Carrant Road and the roads around them. Being close to the A438, Mitton is simple for us to get to. If you are just outside Mitton, we cover Bredon's Hardwick (1 mile north-east), Northway (1 mile east), Church End (2 miles north), Bushley (2 miles west) and Twyning (2 miles north). We also work in nearby towns such as Cheltenham (8 miles south), Gloucester (11 miles south), St Paul's (8 miles south-east), Lansdown (8 miles south), Bishop's Cleeve (5 miles south-east) and Fairview (8 miles south-east).
Around Mitton
Typical jobs here are in homes near Mythe Railway Nature Reserve, Church of Holy Trinity and Tewkesbury Academy. Also close by are Mitton Manor Primary School (less than half a mile south-east) and The White Bear pub (under half a mile south-west). The closest station to Mitton is Ashchurch for Tewkesbury station, about 1.6 miles east. A little further out are Tewkesbury Heritage & Visitor Centre (0.8 miles south-west). For a walk, there’s Beckford Nature Reserve and Kemerton Lake.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Keep abrasive pads and gritty cleaners away from the bath
- Protect the bath with a towel when doing jobs nearby
- Use a soft cloth and washing-up liquid for everyday cleaning
- Keep metal cans and razors off the surface
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
Repair or replace in Mitton?
Replacing a fitted bath typically means a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Prices start from £95. Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- Nothing taken out or refitted
- A year’s guarantee on all work
- Colour-matched on site
- Fixed prices from your pictures
See our prices page and bath cost comparison.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- How hard the colour is to match
- Any earlier repairs that need removing first
- Doing more than one item at once
- What the surface is made of
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from photos
Good photos mean an accurate price. Here’s what we find most useful:
- A close-up of the damage, in focus
- Any details about the material
- Where you are, by postcode
- Details of any past repairs
If you’re in Mitton and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
What we cannot put right
Some jobs aren’t right for a repair, for example:
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
The process
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a morning or an afternoon in most cases. The room is left tidy.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
Ask for a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
What else we do in Mitton
About our accreditations · Every repair comes with a one-year guarantee.
