Gloucestershire · England

Bath chip & crack repair in Bredon's Norton, Gloucestershire

We travel to Bredon's Norton for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • A failed DIY repair that’s discoloured or lifting
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Bredon's Norton?

What we are called out for in Bredon's Norton

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.

Get in touch if you’ve noticed any of these:

  • Cracks in an acrylic bath
  • Holes from dropped items
  • Chips along the edge of the bath
  • Scuffs and scratches in the surface

Questions to ask before you book

  • Whether the price is fixed and includes VAT
  • What aftercare is recommended
  • What happens if the damage is worse than the pictures show
  • Whether the colour is mixed to match

10 questions to ask before you book

Bath repair in Bredon's Norton without replacing anything

Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. Common call-outs are for chips along the edge of the bath and a hole punched through by something heavy, on roll-top & freestanding, cast iron enamel and pressed steel enamel.

Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Where
Bredon's Norton (GL20)
County
Gloucestershire
Guarantee
12 months on all our work
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Repair or replace in Bredon's Norton?

People frequently assume a cracked or chipped bath has to come out. In most cases it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.

Why book with us

  • A year’s guarantee on all work
  • Free fixed quotes from pictures
  • Nothing taken out or refitted
  • Usually one visit, start to finish

See our full price list or bath cost comparison.

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

We carry out planned and one-off repairs for housing associations and facilities teams in Gloucestershire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Keeping it looking good

To keep it looking its best:

  • Don’t leave a fresh chip for long
  • Put a towel in the bath if you are working above it
  • Store metal items away from the bath
  • Rinse it down after each bath

Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

About Bredon's Norton

Bredon's Norton is about 5 miles north of Tewkesbury, in Gloucestershire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Bredon's Norton is one of 470 places in Gloucestershire where we work. Our nearest city page is Birmingham, about 30 miles away.

Here we cover the GL20 postcode area. We also cover the places around Bredon's Norton: Mill End (1 mile south-west), Eckington (1 mile north), Bredon (2 miles south), Upper Strensham (2 miles west) and Lower Strensham (2 miles north-west). Larger places within reach include Cheltenham (11 miles south), Gloucester (15 miles south), Tewkesbury (5 miles south), St Paul's (10 miles south), Lansdown (11 miles south) and Bishop's Cleeve (7 miles south).

Near you in Bredon's Norton

Typical jobs here are in homes near Church of St Giles, among other places. The closest station to Bredon's Norton is Ashchurch for Tewkesbury station, roughly 3.6 miles south. A little further out are Elmley Castle (3.1 miles east). Open spaces near Bredon's Norton include Kemerton Lake and Bredon Hill.

Map of Bredon's Norton © OpenStreetMap contributors

Repairs by material

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.

What happens on the day

We turn up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes two to three hours for most chips, and the room is left clean and tidy.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Mention any parking restrictions or tricky access
  • Make sure the room can be ventilated
  • Tell us if there are stairs or a lift

Get a quote

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.

Get a fixed price

Read more

What affects the price in Bredon's Norton

Prices start from £95. There’s no area surcharge for Bredon's Norton. The price reflects:

  • What the surface is made of
  • Whether old repairs or coatings need taking off
  • The colour and finish to match
  • How easy the damage is to reach

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from pictures

Before you send pictures, a few simple things make all the difference:

  • Good light, ideally daylight, without flash glare
  • A picture taken from further back
  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size

For a price in Bredon's Norton, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Common questions in Bredon's Norton

Can I get a quote without a visit?

Normally, yes. Clear photos let us give you a fixed quote without visiting.

How long before I can use the bath?

Generally within a day, depending on the repair.

Can you match an avocado or pink bath?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Can you repair a crack in an acrylic bath?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

What happens once I’ve sent pictures?

We come back with a fixed price. You are under no obligation.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.