Somerset · England
Bath Repair in Brindham
Bath repair in Brindham without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- A kit repair that didn’t last
- Snagging damage from a refit
Signs you need bath repair in Brindham
Rust normally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Signs it’s time to call us include:
- Chips on the rim or sides
- A cracked acrylic bath
- A chip where the taps sit
- Rusty patches near the plughole
Questions to ask before you book
- What happens if the damage is worse than the photos show
- Who will actually do the work
- Whether the colour is mixed to match
- How long it needs to cure
How we handle bath repair in Brindham
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Common call-outs are for rust spots around the plughole and a chipped rim or side, in roll-top & freestanding, whirlpool & spa baths and pressed steel enamel.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Area
- Brindham (BA6)
- Area hub
- Somerset
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Repairs from £95. Prices are worked out job by job. What matters most is:
- The material
- How much damage there is
- Whether we combine several jobs
- How easy the damage is to reach
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Please include:
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Brindham: your questions answered
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is a holed acrylic bath repairable?
Normally. Send us a picture of the hole and one from under the bath if you can.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from pictures. You will get a fixed figure before you book.
When can I have a bath again?
Normally by the following day, depending on the repair.
What happens on the day
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take a morning or an afternoon.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the following day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Keep a parking space free if you can
Getting a price
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
More services for Brindham
Where we work around Brindham
Brindham is about 4 miles south-west of Wells, in Somerset. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in all 640 towns and villages in Somerset, from the larger towns to small villages.
All of BA6 is covered. Nearby, we also work in Edgarley (1 mile south), Southway (1 mile north), Havyatt (2 miles south-east), East Street (2 miles south-east) and Woodlands (2 miles south-east). Further out, we also cover Bridgwater (13 miles west), Yeovil (15 miles south), Burnham-on-Sea (14 miles north-west), Wells (4 miles north-east), Midsomer Norton (13 miles north-east) and Shepton Mallet (7 miles east).
What’s near Brindham
In Brindham, that means homes near Congregational Church, St Dunstan's Community School and Waggon & Horses pub. Nearby you’ll also find Mendip Hospital (5.2 miles north-east) and Clarks Village (2.9 miles south-west). The countryside around Brindham includes Ham Wall and Glastonbury Tor.
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Send the address, pictures and access details.
What we can’t put right
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- Flexing caused by a failed cradle or loose feet
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Rinse the bath after use, especially in hard water areas
- Use a soft cloth and washing-up liquid for everyday cleaning
- Keep abrasive pads and gritty cleaners away from the bath
- Don’t leave razors or cans standing in the bath
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
About our accreditations · Every repair comes with a one-year guarantee.
