North Somerset · England
Bath Repair for Brinsea homes
Bath repair in and around Brinsea: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips under the taps
- Damage done while the bathroom was being fitted
Bath repair at your home in Brinsea
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s a hole punched through by something heavy and chips caused by builders, we can normally put it right.
Big or small, you get the same one-year guarantee in Brinsea and across North Somerset.
- Location
- Brinsea (BS49)
- Region
- North Somerset
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
A repair is not always the answer, and we’ll tell you before we start. Repairs won’t solve:
- Leaking fittings, which need a plumber
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Your questions about bath repair in Brinsea
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across North Somerset.
Which areas do you work in?
We work UK-wide. Prices don’t change with location.
How do I get a price for bath repair in Brinsea?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
What happens next?
We come back with a fixed price, plus dates. You are under no obligation.
Is a cracked acrylic bath repairable?
Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a few hours, tidy-up included.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the following day.
Before we arrive
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Read more
Also near Brinsea
Other services in Brinsea
What we are called out for in Brinsea
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal lets water in, and rust follows.
Most people contact us when they notice something like this:
- An old repair that has yellowed or come loose
- Cracks in an acrylic bath
- Chips under the taps
- Chips caused by builders
Comparing quotes
- The length of the guarantee and what it covers
- What protection goes down before work starts
- What happens if they find more damage
- How long it needs to cure
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Fix dripping taps early to stop staining and limescale
- Rinse it down after each bath
- Cover the bath during DIY or decorating
- Avoid scourers, wire wool and gritty cream cleaners
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Where we work around Brinsea
Brinsea is about 6 miles south of Nailsea, in North Somerset. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Brinsea is one of 86 places in North Somerset where we work.
We work across BS49. We also cover the places around Brinsea: Honey Hall (1 mile south-west), Congresbury (1 mile north), Sandford (2 miles south-west), Nye (2 miles west) and Star (2 miles south). Further out, we also cover Weston-super-Mare (6 miles west), Portishead (9 miles north), Clevedon (6 miles north), Nailsea (6 miles north), Milton (6 miles west) and Yatton (3 miles north).
Local landmarks in Brinsea
Our clients here include homes close to Church of St John the Baptist, Churchill Academy & Sixth Form and Churchill Church of England Primary School, among other places. For rail, the closest station is Yatton station, about 2.9 miles north-west. A little further out are Banwell Castle (3 miles south-west) and Banwell Museum (3.2 miles south-west). For a walk, there’s Kingswood and Cadbury Hill.
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Brinsea. The price reflects:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- The material
- How many areas need work
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- One picture of the entire bath
- A coin or ruler next to the damage for scale
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Repair or replace: which is better?
Replacing a fitted bath generally means a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in one visit. Prices start from £95. The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Why Brinsea customers choose us
- Colours mixed by hand to suit your surface
- Technicians who travel to you, UK-wide
- Fixed prices from your pictures
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
