Perth and Kinross · Scotland
Bath Repair for Burrelton homes
Bath repair in Burrelton without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- A cracked acrylic bath
- Deep scratches in acrylic
How we handle bath repair in Burrelton
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. Most baths can be used again the following day. We regularly repair pressed steel enamel, cast iron enamel and roll-top & freestanding, and people most frequently call us about chips under the taps and hairline or through cracks in acrylic.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Burrelton (PH13)
- County
- Perth and Kinross
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What we’re called out for in Burrelton
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Most people contact us after spotting something like this:
- Rusty patches near the plughole
- Holes from dropped items
- A failed DIY repair that’s discoloured or lifting
- Cracks in an acrylic bath
What to look for in a quote
- How long the guarantee is and what it covers
- What aftercare is recommended
- Whether they match the colour on site
- A fixed quote, and whether VAT is included
Why repair rather than replace?
Many people think a damaged bath means a new one. Normally it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Fixed prices from your photos
- Straight answers about what a repair can do
- No need to remove anything
- Colour mixed on the day to match
See our pricing and guide to resurfacing and replacement costs.
When a repair isn’t the answer
It helps to know what we cannot do too:
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A steel bath rusted through
Send us photos and we’ll tell you honestly.
Materials we work on in Burrelton
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we look at:
- The colour and finish to match
- Whether we combine several jobs
- How much damage there is
- What kind of damage it is
Our prices are the same across the UK, so there is no premium for Burrelton. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
We price nearly every job from photos. This is what we need:
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- The material, if you know it
- Your postcode, so we can check dates
For a price in Burrelton, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Burrelton: your questions answered
Do you work in Burrelton?
We do. Technicians travel to Burrelton from across the region, with no extra charge for travel.
Are there extra charges for Burrelton?
No. Our quotes include travel, with the same prices everywhere we work.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Can I get a quote without a visit?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
How invisible is a bath repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can you repair a crack in an acrylic bath?
Normally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
Nearby places to Burrelton
More services for Burrelton
Keeping it looking good
Most damage we see is avoidable. A few tips:
- If an acrylic bath flexes, have its feet adjusted
- Have new chips seen to early
- Stick to mild cleaners and a soft cloth
- Put a towel in the bath if you are working above it
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Where we work around Burrelton
Burrelton is about 5 miles south of Blairgowrie and Rattray, in Perth and Kinross. From the centre of Burrelton to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Burrelton is one of 107 places in Perth and Kinross we cover. You can also see our page for Edinburgh, about 40 miles away.
All of PH13 is within our area. That includes homes on High Street, South Street and Scott Street. Neighbouring places we cover include Woodside (1 mile north-east), Markethill (2 miles north-east), Coupar Angus (2 miles north-east), Meikleour (3 miles north-west) and Kinrossie (3 miles south). Larger places within reach include Perth (10 miles south-west), Blairgowrie and Rattray (5 miles north), Letham (11 miles south-west), Scone (8 miles south-west), Tulloch (10 miles south-west) and Alyth (8 miles north).
Around Burrelton
Nearby you will also find Blairgowrie Community Hospital (4.9 miles north) and Castle Hill (2.6 miles west). Not far away are Gask Hill and Stormont Loch.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
How the visit works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can normally use the bath the following day.
Before we arrive
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
