Cumbria · England

Bath Repair for Cark homes

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Cark and across Cumbria. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Cark homes

Bath repair in Cark, done in place

Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. We’re often asked to fix scratches you can feel with a fingernail and a chipped rim or side, in whirlpool & spa baths, cast iron enamel and roll-top & freestanding.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Cark (LA11)
Region
Cumbria
Warranty
One year on every repair
Price
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

Common problems we fix in Cark

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.

It’s worth getting a quote if you see:

  • Damage beneath the taps
  • Rust spots around the plughole
  • Scuffs and scratches in the surface
  • A cracked acrylic bath

What your quote should include

  • Whether the price covers travel
  • Aftercare advice
  • What preparation is included
  • Who will actually do the work

How to compare quotes

DIY kit or professional repair?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Work for landlords and builders

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

We regularly work with letting and managing agents. Send the address, photos and access details.

When we’d advise against a repair

We won’t take on work that will not last, so these are the limits:

  • Leaking fittings, which need a plumber
  • A steel bath rusted through
  • Wear across the whole surface, which needs re-enamelling

Send us pictures and we’ll tell you honestly before you book.

Materials we repair

  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel

About Cark

Cark is about 5 miles east of Ulverston, in Cumbria. Our technicians come to homes and businesses in Cark and nearby villages, so you do not need to take anything anywhere. We cover 438 places across Cumbria, from the larger towns to small villages. Our nearest city page is Liverpool, about 53 miles away.

Here we cover the LA11 postcode area. Whether you live on Station Road, Station Approach and Caton Lane or a nearby road, we can come to you. Nearby, we also work in Flookburgh (1 mile south-east), Ravenstown (1 mile south), Allithwaite (1 mile east), Cartmel (2 miles north-east) and Kents Bank (2 miles east). Within a short drive, we also cover Barrow-in-Furness (11 miles south-west), Kendal (14 miles north-east), Ulverston (5 miles west), Hindpool (11 miles west), Salthouse (11 miles south-west) and Dalton-in-Furness (8 miles west).

Around Cark

Typical jobs here are in homes near Cartmel Priory CofE School, Flookburgh CofE Primary School and Engine Inn, among other places. Cark has its own railway station: Cark station. Green spaces nearby include Roudsea Tarn and Humphrey Head.

Map of Cark © OpenStreetMap contributors

How the visit works

There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take a few hours, depending on the damage, including clearing up.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can typically use the bath the following day.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Plan for the room to be out of bounds to pets and children
  • Tell us about parking, stairs or access

Get a quote

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a free quote

Advice

Different materials, different repairs

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.

Aftercare tips

How the surface is treated afterwards matters:

  • Keep metal cans and razors off the surface
  • Avoid scourers, wire wool and gritty cream cleaners
  • Put a towel in the bath if you’re working above it
  • Stick to mild cleaners and a soft cloth

Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.

Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.

FAQs for Cark

What if the damage is worse than the photos show?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before and we will plan for it.

Can you redo an old repair?

Yes, we do this frequently. We strip it out, deal with any rust and repair it again.

Is it OK to have pets in the house?

Just keep them out of the work area. We’ll tell you when the room can be used again.

What does bath repair cost?

Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Are there extra charges for Cark?

No. Our quotes include travel, with the same prices everywhere we work.

What affects the price in Cark

Repairs from £95. Every quote is fixed and free. What we look at:

  • Any earlier repairs that need removing first
  • The type of damage
  • The size and number of damaged areas
  • The material and finish

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed quote

Most quotes are done from photos alone. To help us price it:

  • Daylight if possible, and no flash reflection
  • A close-up of the damage, in focus
  • Something in shot to show the size
  • Details of any past repairs

Most customers in Cark get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.