Gloucestershire · England

Bath chip & crack repair in Chalford, Gloucestershire

Bath repair across Chalford and nearby, done in a single visit in most cases.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Chalford

About Chalford

Chalford is about 3 miles east of Stroud, in Gloucestershire. Jobs in Chalford are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We work in all 470 towns and villages in Gloucestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 52 miles away.

Every address in GL6 is covered. Streets in the area include London Road, High Street and Hawk Close. We also cover the places around Chalford: Bussage (1 mile west), Eastcombe (1 mile north), Brownshill (1 mile south-west), France Lynch (1 mile east) and Knave-in-hole (1 mile south-west). Further out, we also cover Cheltenham (12 miles north), Gloucester (9 miles north), Stroud (3 miles west), St Paul's (12 miles north), Cirencester (8 miles east) and Lansdown (12 miles north).

Around Chalford

Our clients here include homes close to St Augustine of Canterbury, Thomas Keble School and Three Groves Wood, among other places. The closest station to Chalford is Stroud station, roughly 2.7 miles north-west. A little further out are Miserden Castle (4.9 miles north-east) and Stroud General Hospital (2.3 miles north-west). For a walk, there is Frome Banks.

Map of Chalford © OpenStreetMap contributors

How we handle bath repair in Chalford

Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for a chipped rim or side and scratches you can feel with a fingernail, in acrylic, pressed steel enamel and whirlpool & spa baths.

A one-year guarantee comes as standard, so you are covered after the visit.

Where
Chalford (GL6)
Area hub
Gloucestershire
Warranty
One year on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Prices and what affects them

Repairs from £95. There are no hourly rates or hidden extras. The price is based on:

  • How much damage there is
  • Any earlier repairs that need removing first
  • The type of damage
  • Whether we combine several jobs

There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your pictures

Most quotes are done from photos alone. To help us price it:

  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size
  • Daylight if possible, and no flash reflection
  • Any earlier repairs or coatings

For a price in Chalford, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Different materials, different repairs

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.

Keeping it looking good

Nothing complicated is needed:

  • Clean with warm water and a mild detergent
  • Put a towel in the bath if you are working above it
  • A dripping tap stains enamel, so fix it early
  • Get any new chip repaired before it rusts

Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.

Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.

The process

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take a few hours, depending on the damage, including clearing up.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Keep children and pets away from the room on the day
  • Let us know which floor the room is on
  • Make sure the area is dry

How to get a price

To get a price, send a couple of pictures using our quote form or call us. We’ll say straight away if a repair is the right fix.

Get a fixed quote

Advice

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

When we would advise against a repair

Before booking, it’s worth knowing the limits:

  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Rust that has eaten right through a steel bath

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we repair

  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel

Landlords, agents and businesses in Chalford

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.

Common questions in Chalford

Do I have to be there?

We need someone to let us in. You do not need to watch us work.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.

How long does the repair take to cure?

Normally within a day, though it depends on what we’ve done.

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

How do I book?

Some photos, your postcode and how to reach you. On the day, access to the room.

Is repairing better than replacing?

Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

Do you work in Chalford?

Yes. We work across the UK and come to Chalford. Send us photos for a fixed quote, or call 0345 017 0787.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

Repairing versus replacing in Chalford

Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why us?

  • CHAS, Constructionline and SafeContractor accredited
  • Honest advice, even when it means no job
  • No extra charge for your area
  • A year’s guarantee on all work

Take a look at our prices page and bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.