South Gloucestershire · England
Bath Repair for Cheswick homes
Bath repair across Cheswick and nearby, usually in one visit.
- Repairs from £95
- Rust by the waste and overflow
- A failed DIY repair that’s discoloured or lifting
Should you replace it?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Cheswick
- No need to remove anything
- Colour-matched on site
- No extra charge for your area
- Fixed prices from your pictures
Take a look at our full price list and guide to resurfacing and replacement costs.
Bath repair in Cheswick without replacing anything
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Our repair technicians work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and the jobs we see most are a cracked acrylic bath and rusty patches near the plughole.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Location
- Cheswick (BS7, BS16, BS34)
- Region
- South Gloucestershire
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Cheswick
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Look out for any of the following:
- Cracks in an acrylic bath
- A chip where the taps sit
- An old repair that has yellowed or come loose
- Rust by the waste and overflow
What your quote should include
- When it can be used again
- The length of the guarantee and what it covers
- Whether cleaning and preparation are in the price
- How your room will be protected
Where we work around Cheswick
Cheswick is about 1 mile north-east of Horfield, in South Gloucestershire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Cheswick is one of 110 towns and villages in South Gloucestershire where we work. Our nearest city page is Birmingham, about 73 miles away.
Here we cover the BS7, BS16 and BS34 postcode area. Whether you live on Ellen Lane, Hatton Road and Kipling Road or a nearby road, we can come to you. Close by, we cover Lockleaze (1 mile south), Horfield (1 mile south-west), Stapleton (1 mile south), Broomhill (1 mile south-east) and Ashley Down (2 miles south-west). Further out, we also cover Kingswood (4 miles south-east), Mangotsfield (3 miles east), Yate (7 miles north-east), Thornbury (8 miles north), Morton (8 miles north) and Chipping Sodbury (8 miles east).
Near you in Cheswick
Around Cheswick, we work in homes near The Gainsborough pub, Stoke Park and Saint Mary Magdalen and Saint Francis Lockleaze, among other places. Nearby too are Trinity Academy (0.8 miles south), South Gloucestershire Hospital Home Teaching Service (1.3 miles east) and Wallscourt Farm Academy (within half a mile south-east). There is a railway station in Cheswick itself: Filton Abbey Wood station. Other landmarks nearby include Bristol Castle (3.2 miles south-west) and Glenside Hospital Museum (1.2 miles south-east). Green spaces nearby include Purdown and Tarn Lake.
- Local facilities include Barton Regis Rural District (1.8 miles south)
Cheswick: your questions answered
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Cheswick.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we’ll plan for it.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
When can I have a bath again?
Generally within a day, though it depends on what we have done.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Rinse the bath after use, especially in hard water areas
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t leave a fresh chip for long
- Keep metal cans and razors off the surface
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
The process
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take a few hours, and you can get on with other things while we are there.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the following day.
Before we arrive
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
Get a quote
Most customers in Cheswick get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
What affects the price in Cheswick
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- The material
- How many items we do on one visit
- Access to the area
- Unusual colours or finishes
We charge the same wherever you are, with no extra for Cheswick. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- A picture taken from further back
- Details of any past repairs
To get a price, send two or three pictures using our quote form or ring us. We will say right away whether it can be repaired.
For landlords and businesses
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
What else we do in Cheswick
About our accreditations · Every repair comes with a one-year guarantee.
