Bristol · England
Bath Repair for Conham homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Conham, with a one-year guarantee on every repair.
- Repairs from £95
- Chips under the taps
- A kit repair that didn’t last
How we handle bath repair in Conham
Most of our bath repairs take a few hours, and the bath is back in use the next day. You won’t need a plumber or tiler, because nothing is disconnected. We regularly repair roll-top & freestanding, acrylic and cast iron enamel, and people most frequently call us about an old repair that has yellowed or come loose and chips under the taps.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Conham (BS4, BS15)
- Region
- Bristol
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Conham customers choose us
- No need to remove anything
- Work done at your home or business
- We leave the room as we found it
- Colours mixed by hand to suit your surface
See our prices page and bath cost comparison.
Conham and the surrounding area
Conham is about 1 mile south of St George, in Bristol. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. We cover all 89 towns and villages in Bristol. We work right across the region, from Conham to Birmingham (about 76 miles away).
Jobs in BS4 and BS15 are booked in the same way as anywhere else. That includes homes on Gays Road, Heath Road and Marion Road and the roads around them. We also cover the places around Conham: Brislington (1 mile south-west), Hanham (1 mile north-east), St George (1 mile north), Crew's Hole (1 mile north) and Totterdown (2 miles west). Further out, we also cover Bristol (3 miles north-west), Montpelier (3 miles north-west), Bedminster (3 miles west), Cotham (4 miles north-west), Canon's Marsh (3 miles west) and Southville (3 miles west).
Around Conham
In Conham, that means homes near Hanham High School, Troopers Hill and Broomhill Infant School, among other places. Other local landmarks include Kings Arms Public House (0.9 miles south-west), St Brendan's Sixth Form College (0.7 miles south) and Christ Church (0.7 miles north-east). Conham’s nearest station is Lawrence Hill station, about 1.9 miles north-west of the centre. Nearby you will also find Willsbridge Castle (2 miles east) and British Empire and Commonwealth Museum (2.4 miles west). Open spaces near Conham include Lodge Hill.
- Local facilities include Avon (2.4 miles west)
Common questions in Conham
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you work in Conham?
Yes. We cover the whole UK and come to Conham. Send us photos for a fixed quote, or call 0345 017 0787.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
How long does the repair take to cure?
Most baths can be used the day after. We confirm the time before we leave.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Towns and villages near Conham
What else we do in Conham
Common problems we fix in Conham
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.
You may need us if you’ve spotted any of these:
- Rust spots around the plughole
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
- Cracks in an acrylic bath
What to look for in a quote
- What protection goes down before work starts
- Whether the price covers travel
- A fixed price, and whether VAT is included
- What prep work is covered
How we price bath repair
Repairs from £95. There’s no charge for travel to Conham. The price comes down to:
- Any earlier repairs that need removing first
- The material and finish
- How much damage there is
- How many items we do on one visit
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
Most quotes are done from photos alone. To make it quick:
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Landlords, agents and businesses in Conham
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We work for landlords, letting agents and housing providers in Conham as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
What we can’t put right
In fairness, there are a few things a repair won’t fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we cannot reach from underneath
- Leaking fittings, which need a plumber
Send us photos and we will tell you honestly before booking.
What we work on
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Keeping it looking good
Looking after the surface is easy:
- If an acrylic bath flexes, have its feet adjusted
- Avoid scourers, wire wool and gritty cream cleaners
- Don’t leave razors or cans standing in the bath
- A dripping tap stains enamel, so fix it early
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
How the visit works
Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a few hours, and we leave the room as we found it.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the following day.
Getting ready for the visit
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
- Let us know about parking or access
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
