Bristol · England
Bath chip & crack repair in Montpelier, Bristol
Local bath repair for Montpelier: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rusty patches near the plughole
- A cracked acrylic bath
Repairing versus replacing in Montpelier
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Work done at your home or business
- Every repair guaranteed for a year
- One price list for the entire UK
- Rooms protected and left tidy
Read our full price list or bath cost comparison.
Bath repair at your home in Montpelier
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour-matched so it blends in. We work on acrylic, cast iron enamel and roll-top & freestanding, and people most frequently call us about a hole punched through by something heavy and chips caused by builders.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Area
- Montpelier (BS2, BS6, BS1)
- Area hub
- Bristol
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Montpelier
Also in Montpelier
FAQs for Montpelier
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
What happens after I send photos?
We come back with a fixed price, plus dates. There’s no obligation to book.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Can you repair a hole in a bath?
Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a morning or an afternoon. If we find something your pictures didn’t show, we will explain it before carrying on.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
How to care for the repair
It’s all simple stuff:
- Have new chips seen to early
- Protect the bath with a towel when doing jobs nearby
- If an acrylic bath flexes, have its feet adjusted
- Rinse it down after each bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Common problems we fix in Montpelier
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.
It’s worth getting a quote if you see:
- A kit repair that didn’t last
- Cracks in an acrylic bath
- Chips under the taps
- Scuffs and scratches in the surface
Questions to ask before you book
- What happens if the damage is worse than the photos show
- How long it needs to cure
- Whether they match the colour on site
- Whether there are any call-out or travel charges
Covering Montpelier
Montpelier is about 1 mile north-east of Bristol, in Bristol. Anywhere in BS2, a technician comes to you. We cover 89 places in Bristol. Our jobs stretch from Montpelier to Birmingham (about 75 miles away).
All of BS2, BS6 and BS1 is covered, from the main roads to the quietest streets. Streets in the area include Dove Lane, City Road and York Road. Main roads around Montpelier include the A4032, which makes travel easy. Close by, we cover St Pauls (1 mile south-east), St Werburghs (1 mile north-east), Baptist Mills (1 mile east), St Jude's (1 mile south-east) and Bristol (1 mile south-west). We also work in nearby towns such as Soundwell (3 miles east), Mayfield Park (3 miles east), Hartcliffe (4 miles south), Staple Hill (4 miles east), Brentry (3 miles north) and Sea Mills (3 miles north-west). As one of the bigger places in Bristol, Montpelier sees plenty of our work.
Local landmarks in Montpelier
We visit homes around Old England Public House, Riverside Park and Ivy Pentecostal Church and the streets around them. Other local landmarks include St Barnabas Church of England VC Primary School (under half a mile east), Montpelier High School (within half a mile west) and North Bristol Post 16 Centre (0.6 miles west). Montpelier has its own railway station: Montpelier station. Further afield, we also cover the area around Bristol Castle (0.8 miles south) and Cabot Circus (0.6 miles south). Green spaces nearby include Brandon Hill and Tarn Lake.
- Parks and local facilities nearby include Avon (1.2 miles south)
What affects the price in Montpelier
Prices start from £95. We do not charge extra for travel to Montpelier. The price depends on:
- The material
- The type of damage
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
Our prices are the same across the UK, so there is no premium for Montpelier. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- Any details about the material
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Any earlier repairs or coatings
To get a price, send a couple of photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
