Kent · England
Bath chip & crack repair in Ebbsfleet, Kent
Bath repair in and around Ebbsfleet: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- Impact holes in acrylic
Signs you need bath repair in Ebbsfleet
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
Typical reasons for a call-out include:
- An old repair that has yellowed or come loose
- Cracks in an acrylic bath
- Damage done while the bathroom was being fitted
- Impact holes in acrylic
What your quote should include
- How long the guarantee is and what it covers
- If travel is included in the price
- What protection goes down before work starts
- Who turns up on the day
Bath repair in Ebbsfleet without replacing anything
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. We are frequently asked to fix a hole punched through by something heavy and rust spots around the plughole, in roll-top & freestanding, acrylic and cast iron enamel.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Area
- Ebbsfleet (CT12, CT13)
- County
- Kent
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Ebbsfleet
Ebbsfleet is about 3 miles south-west of St Lawrence, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 922 towns and villages across Kent. We work right across the region, from Ebbsfleet to London (about 64 miles away).
We cover every part of CT12 and CT13. Close by, we cover Richborough Port (1 mile south), Sevenscore (1 mile north), Cliffs End (1 mile north-east), Way (2 miles north-west) and Pegwell (2 miles north-east). Larger places within reach include Canterbury (12 miles west), Margate (5 miles north), Dover (12 miles south), Ramsgate (3 miles north-east), Broadstairs (5 miles north-east) and Whitstable (14 miles west).
Around Ebbsfleet
Around Ebbsfleet, we work in homes near Sandwich and Pegwell Bay and The Sportsman pub. Ebbsfleet’s nearest station is Thanet Parkway station, roughly 1.2 miles north-east. Further afield, we also cover the area around Ramsgate General Hospital (2.8 miles east) and RAF Manston History Museum (2.4 miles north). For a walk, there is Sandwich and Pegwell Bay.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, and we finish by cleaning up and talking you through the result.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
How to prepare
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Read more
Keeping it looking good
Once the work has cured, treat it gently:
- Give the bath a quick rinse after use
- Put a towel in the bath if you’re working above it
- Keep metal cans and razors off the surface
- Keep abrasive pads and gritty cleaners away from the bath
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Your questions about bath repair in Ebbsfleet
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you come to Ebbsfleet?
Yes. We cover the entire UK and travel to Ebbsfleet. Send pictures and we’ll quote, or call 0345 017 0787.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Is a bath repair permanent?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Prices and what affects them
Repairs from £95. There is no area surcharge for Ebbsfleet. The price reflects:
- The material
- What kind of damage it is
- Whether we combine several jobs
- Access to the area
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
You can typically get a fixed price without us visiting. To help us price it:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- Your postcode, so we can check dates
- One picture of the entire bath
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Repairing versus replacing in Ebbsfleet
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. Our prices are the same across the UK, so there is no premium for Ebbsfleet. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Straight answers about what a repair can do
- One-year guarantee on every repair
- One visit for most repairs
- Colour mixed on the day to match
Read our prices page and resurfacing vs replacement cost guide.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What we cannot put right
Before booking, it’s worth knowing the limits:
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Wear across the entire surface, which needs re-enamelling
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Nearby places to Ebbsfleet
What else we do in Ebbsfleet
About our accreditations · Every repair comes with a one-year guarantee.
