Isle of Anglesey · Wales
Bath Repair for Fryars Bay homes
Local bath repair for Fryars Bay: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- A hole punched through by something heavy
- Cracks in an acrylic bath
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Bath repair in Fryars Bay, done in place
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. We are frequently asked to fix a kit repair that didn’t last and cracks in an acrylic bath, across acrylic, cast iron enamel and pressed steel enamel.
All our work is covered by our one-year guarantee.
- Area
- Fryars Bay (LL58)
- Area hub
- Isle of Anglesey
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Fryars Bay
Fryars Bay is about 5 miles north-east of Bangor, in Isle of Anglesey. From the centre of Fryars Bay to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 115 places across Isle of Anglesey, from the larger towns to small villages. You can also see our page for Liverpool, about 49 miles away.
All of LL58 is covered, from the main roads to the quietest streets. Other places close to Fryars Bay include Llanfaes (1 mile south), Llangoed (1 mile north), Sling (1 mile south-west), Beaumaris (2 miles south) and Llanddona (2 miles west). We also work in nearby towns such as Llangefni (9 miles west), Menai Bridge (5 miles south-west), Porthaethwy (5 miles south-west), Amlwch (14 miles north-west), Llanfair Pwllgwyngyll (6 miles south-west) and Benllech (6 miles west).
Landmarks near Fryars Bay
Locally, our jobs take us to homes close to Tafarn y Rhyd pub, St Catherine's Church and Ysgol Gynradd Llangoed and the streets around them. The nearest railway station is Bangor (Gwynedd) station, roughly 4.7 miles south-west. Well-known places in the area include Haulfre Stables (0.8 miles north) and Bryn y Neuadd Hospital (4.8 miles south-east). Not far away are Llyn Bodgylched and Bwrdd Arthur.
Aftercare tips
After the repair has cured, a few habits help it last:
- Give the bath a quick rinse after use
- Keep abrasive pads and gritty cleaners away from the bath
- If an acrylic bath flexes, have its feet adjusted
- Do not leave a fresh chip for long
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Prices and what affects them
Repairs from £95. We price every job individually. What matters most is:
- How many areas need work
- Unusual colours or finishes
- Any earlier repairs that need removing first
- The material
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Natural light rather than flash
- Any earlier repairs or coatings
- Something in shot to show the size
- A close-up of the damage, in focus
Upload pictures of the damage and one of the whole item, with your LL58 postcode, and we’ll reply with a fixed price.
How it works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a few hours, depending on the damage, and you’re welcome to carry on with your day while we work.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the next day, the bath is ready to use.
Preparing for the visit
- Keep a parking space free if you can
- Clear the area around the damage
- Let us know about parking or access
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Related advice
What a repair cannot fix
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- Metal that has corroded all the way through
- Cracks in acrylic we can’t reach from underneath
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Fryars Bay
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
Why repair rather than replace?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Free fixed quotes from pictures
- We leave the room as we found it
Take a look at our full price list and bath cost comparison.
Landlords, agents and businesses in Fryars Bay
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
What we are called out for in Fryars Bay
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Look out for any of the following:
- Damage beneath the taps
- Impact holes in acrylic
- Damage done while the bathroom was being fitted
- Scuffs and scratches in the surface
Before booking anyone
- Whether the colour is mixed to match
- Whether cleaning and preparation are in the price
- If travel is included in the price
- Whether the price is fixed and includes VAT
Questions from Fryars Bay
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Isle of Anglesey.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
How long before I can use the bath?
Most baths can be used the next day. We confirm the time before we leave.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Do you cover the whole of Isle of Anglesey?
We work UK-wide. Our prices are the same everywhere.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
More services for Fryars Bay
About our accreditations · Every repair comes with a one-year guarantee.
