Isle of Anglesey · Wales
Bath Repair in Llanddona
We travel to Llanddona for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Damage beneath the taps
- Scuffs and scratches in the surface
When to call us in Llanddona
Heavy toiletries are the biggest single cause of chips. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Typical reasons for a call-out include:
- A kit repair that didn’t last
- Deep scratches in acrylic
- Snagging damage from a refit
- A cracked acrylic bath
Comparing quotes
- How long the guarantee is and what it covers
- What happens if the damage is worse than the photos show
- Whether the colour is mixed to match
- How long it needs to cure
How we handle bath repair in Llanddona
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. We regularly repair cast iron enamel, roll-top & freestanding and acrylic, and common reasons people get in touch are hairline or through cracks in acrylic and chips along the edge of the bath.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Llanddona (LL58)
- County
- Isle of Anglesey
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in parts of an acrylic bath we can’t get to from below
Send us photos and we will tell you honestly.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Get any new chip repaired before it rusts
- Keep metal cans and razors off the surface
- Stick to mild cleaners and a soft cloth
- Rinse it down after each bath
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Questions from Llanddona
Can you repair a crack in an acrylic bath?
Generally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Will I be able to see the repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
What happens on the day
Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, and the room is left clean and tidy.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
Ask for a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Advice
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
For landlords and businesses
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Why repair rather than replace?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why Llanddona clients choose us
- Work done at your home or business
- Usually one visit, start to finish
- A fixed quote before booking
- CHAS, Constructionline and SafeContractor accredited
Read our pricing and guide to resurfacing and replacement costs.
About Llanddona
Llanddona is about 5 miles north of Bangor, in Isle of Anglesey. Anywhere in LL58, we carry out the work at your property. Llanddona is one of 115 places in Isle of Anglesey where we work. You can also see our page for Liverpool, about 51 miles away.
We cover every part of LL58 and the streets around it. Whether you live on Mynydd Crafcoed, Lon Glan Rhyd and Allt Bron-Philip or anywhere nearby, a technician can come to you. If you’re just outside Llanddona, we cover Wern y Wylan (1 mile west), Sling (1 mile south-east), Llansadwrn (2 miles south-west), Cwm Cadnant (2 miles south) and Pen-y-garnedd (3 miles south-west). Larger places within reach include Llangefni (8 miles west), Menai Bridge (4 miles south), Porthaethwy (5 miles south), Amlwch (12 miles north-west), Llanfair Pwllgwyngyll (5 miles south-west) and Benllech (4 miles north-west).
What’s near Llanddona
In Llanddona, that means homes near Owain Glyndwr pub and St Iestyn's Church, among other places. The closest station to Llanddona is Bangor (Gwynedd) station, roughly 4.8 miles south of the centre. Nearby you will also find Haulfre Stables (2.3 miles east) and Castell Aberlleiniog (2.5 miles east). For a walk, there is Llangoed and Aberlleiniog Common Local Nature Reserve and Llyn Bodgylched.
Nearby places to Llanddona
Also in Llanddona
About our accreditations · Every repair comes with a one-year guarantee.
