Isle of Anglesey · Wales
Bath chip & crack repair in Wern y Wylan, Isle of Anglesey
Problem with your bath in Wern y Wylan? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A chipped rim or side
- Rusty patches near the plughole
Signs you need bath repair in Wern y Wylan
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
People generally call us when they notice something like this:
- Chips on the rim or sides
- Rusty patches near the plughole
- Impact holes in acrylic
- Scuffs and scratches in the surface
What to look for in a quote
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the photos show
- Who will actually do the work
About our bath repair in Wern y Wylan
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. We work on cast iron enamel, pressed steel enamel and whirlpool & spa baths, and common reasons people contact us are a cracked acrylic bath and holes from dropped items.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Wern y Wylan (LL58)
- Region
- Isle of Anglesey
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Wern y Wylan
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- The type of damage
- The colour and finish to match
- Whether old repairs or coatings need taking off
- How many areas need work
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Any details about the material
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim usually crack when it comes out, a new panel is often needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why choose Surface Doctor in Wern y Wylan
- Nothing taken out or refitted
- Free fixed quotes from pictures
- Colour mixed on the day to match
- We’ll tell you if it’s not worth repairing
Read our full price list and resurfacing vs replacement cost guide.
How to look after the repair
So the finish stays in good condition:
- Get any new chip repaired before it rusts
- Cover the bath during DIY or decorating
- Use a soft cloth and washing-up liquid for everyday cleaning
- Check that an acrylic bath doesn’t move when you stand in it
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Towns and villages near Wern y Wylan
Other services in Wern y Wylan
Where we work around Wern y Wylan
Wern y Wylan is about 5 miles north of Bangor, in Isle of Anglesey. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 115 towns and villages in Isle of Anglesey. We work right across the region, from Wern y Wylan to Liverpool (51 miles away).
Postcode districts we cover here: LL58. Nearby, we also work in Llanddona (1 mile east), Llansadwrn (2 miles south), Sling (2 miles south-east), Pen-y-garnedd (2 miles south-west) and Cwm Cadnant (2 miles south). We also work in nearby towns such as Llangefni (7 miles west), Menai Bridge (4 miles south), Porthaethwy (5 miles south), Amlwch (11 miles north-west), Llanfair Pwllgwyngyll (5 miles south) and Benllech (3 miles north-west).
Near you in Wern y Wylan
Around Wern y Wylan, we work in homes near St Dona's Church and Owain Glyndwr pub, among other places. Well-known places in the area include Castell Aberlleiniog (3.3 miles east) and Minffordd Hospital (5.5 miles south). Not far away are Mynydd Llwydiarth and Llangoed and Aberlleiniog Common Local Nature Reserve.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
FAQs for Wern y Wylan
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Can you repair a hole in a bath?
Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair a crack in an acrylic bath?
Often, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Repairs by material
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What happens on the day
Arrival times are agreed in advance, so you’re not left guessing. Once we’re there, the work takes two to three hours for most chips in most cases. We leave the room clean and ready to use once it has cured.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
- Tell us about any previous repairs or coatings
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you’re under no obligation.
Advice
What a repair can’t fix
In fairness, some problems need a different fix:
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
