Aberdeenshire · Scotland
Bath Repair in Garmond
Chip and crack repairs to enamel, acrylic and cast iron baths in Garmond, carried out at your home and guaranteed for a year.
- Repairs from £95
- A kit repair that didn’t last
- Scuffs and scratches in the surface
Repairing versus replacing in Garmond
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
What you get with us
- One price list for the whole UK
- Work done at your home or business
- Fixed prices from your photos
- One-year guarantee on every repair
See our full price list and guide to resurfacing and replacement costs.
About our bath repair in Garmond
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. Typical jobs include an old repair that has yellowed or come loose and damage done while the bathroom was being fitted, on whirlpool & spa baths, acrylic and roll-top & freestanding.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Garmond (AB53)
- Area hub
- Aberdeenshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Landlords, agents and businesses in Garmond
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Garmond, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Garmond questions
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
Is a holed acrylic bath repairable?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Nearby places to Garmond
More services for Garmond
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Keep abrasive pads and gritty cleaners away from the bath
- Do not leave razors or cans standing in the bath
- Clean with warm water and a mild detergent
- Cover the bath during DIY or decorating
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
Signs you need bath repair in Garmond
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
The most common problems we’re called about are:
- Scuffs and scratches in the surface
- A kit repair that didn’t last
- A cracked acrylic bath
- Chips under the taps
Questions to ask before booking
- How soon you can use it again
- What prep work is covered
- What protection goes down before work starts
- If travel is included in the price
What we do, step by step
We work cleanly and quietly. Protection goes down first, then the work takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to care for it.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
What affects the price in Garmond
Repairs from £95. Quotes are free and the price is fixed. What we look at:
- How much damage there is
- Where the damage is and how we get to it
- How many items we do on one visit
- Any earlier repairs that need removing first
Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Garmond and the surrounding area
Garmond is about 14 miles south-west of Fraserburgh, in Aberdeenshire. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. Garmond is one of 161 places in Aberdeenshire where we work.
Our visits in AB53 work the same way as everywhere else we cover. We also cover the places around Garmond: Cuminestown (1 mile south), New Byth (1 mile north-east), Turriff (5 miles west), New Pitsligo (5 miles north-east) and Turfhill (5 miles south-east). Larger places within reach include Fraserburgh (14 miles north-east), Banff (11 miles north-west), Macduff (10 miles north-west), Oldmeldrum (15 miles south), Mintlaw (12 miles east) and Broadsea (15 miles north-east). For island and remote addresses, ring us first and we will plan the trip.
What’s near Garmond
Our clients here include homes close to Monquhitter Parish Church and the streets around them. Nearby you will also find Turriff Cottage Hospital (4.8 miles west) and Delgatie Castle (3.4 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
