Wiltshire · England
Bath Repair in Littlecott
Problem with your bath in Littlecott? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- Chips under the taps
What a repair can’t fix
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Acrylic cracks with no access behind them
- A steel bath rusted through
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
How we handle bath repair in Littlecott
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s rust by the waste and overflow and a failed DIY repair that’s discoloured or lifting, we can help.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Littlecott (SN9)
- County
- Wiltshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- A fixed quote before booking
- Colour mixed on the day to match
- Nothing taken out or refitted
- We’ll tell you if it’s not worth repairing
See our prices page or resurfacing vs replacement cost guide.
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Make sure an acrylic bath is firm underfoot
- Fix dripping taps early to stop staining and limescale
- Clean with warm water and a mild detergent
- Rinse the bath after use, especially in hard water areas
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Do you need bath repair in Littlecott?
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Most people contact us when they notice something like this:
- Rust spots around the plughole
- An old repair that has yellowed or come loose
- A cracked acrylic bath
- Holes from dropped items
Before you book anyone
- Whether the colour is mixed to match
- If travel is included in the price
- Whether cleaning and preparation are in the price
- What happens if they find more damage
What we do, step by step
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a morning or an afternoon. We leave the room clean and you will know when it can be used.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Keep a parking space free if you can
- Have a window or extractor fan available
- Ensure the area is dry
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Read more
Questions from Littlecott
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
It’s been repaired before. Can you still fix it?
Normally, yes. The old repair comes out first, so let us know about it.
What areas do you cover?
All of Wiltshire, and the rest of the UK. Travel is included in the price.
Places near Littlecott
Other services in Littlecott
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Prices and what affects them
Repairs from £95. You won’t pay by the hour. The price depends on:
- How easy the damage is to reach
- Whether we combine several jobs
- How many areas need work
- The type of damage
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your pictures
It only takes a minute to photograph the damage. Please include:
- Something in shot to show the size
- Details of any past repairs
- One picture of the entire bath
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
About Littlecott
Littlecott is about 7 miles north of Amesbury, in Wiltshire. Anywhere in SN9, a technician comes to you. Littlecott is one of 425 towns and villages in Wiltshire where we work. Our jobs stretch from Littlecott to London (75 miles away).
Every address in SN9 is covered, from the main roads to the quietest streets. Whether you live on Paddock Close, Water Lane and Grants Road or anywhere nearby, a technician can come to you. Close by, we cover Coombe (1 mile south-east), Fittleton (1 mile south), Haxton (1 mile south), Netheravon (2 miles south) and Figheldean (3 miles south). We also work in nearby towns such as Salisbury (13 miles south), Calne (15 miles north-west), Devizes (10 miles north-west), Amesbury (7 miles south), Marlborough (11 miles north) and Bugmore (14 miles south).
Around Littlecott
In Littlecott, that means homes near Church of All Saints And St Margaret and Red Lion Freehouse pub and the streets around them.
About our accreditations · Every repair comes with a one-year guarantee.
