Somerset · England

Bath Repair in South Brewham

Bath repair in and around South Brewham: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Chips under the taps
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in South Brewham

About our bath repair in South Brewham

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. Common call-outs are for an old repair that has yellowed or come loose and chips under the taps, on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Where
South Brewham (BA10)
County
Somerset
Cover
One year on every repair
Quotes
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

South Brewham and the surrounding area

South Brewham is about 8 miles south-west of Frome, in Somerset. We visit clients in South Brewham and the surrounding area, so nothing has to leave your home. South Brewham is one of 640 places in Somerset where we work.

We work across BA10 and the streets around it. You will find streets such as Street Lane, Tile Hill and Charcroft Hill. Other places close to South Brewham include North Brewham (1 mile north), Kilmington (3 miles east), Witham Friary (3 miles north-east), Stourton (4 miles east) and Yarnfield (4 miles east). Within a short drive, we also cover Frome (8 miles north-east), Wells (13 miles north-west), Midsomer Norton (12 miles north), Shepton Mallet (8 miles north-west), Street (15 miles west) and Glastonbury (14 miles west).

Landmarks near South Brewham

Around South Brewham, we work in homes near Church of Saint John the Baptist and The Old Red Lion pub and the streets around them. South Brewham’s nearest station is Bruton station, about 2.2 miles west of the centre. Nearby you will also find Four Towers (2.1 miles south-east) and Ballands Castle (3.7 miles south-east). The countryside around South Brewham includes Aaron's Hill.

Map of South Brewham © OpenStreetMap contributors

South Brewham: your questions answered

Is a cracked acrylic bath repairable?

Typically, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.

Something went through my bath. Can it be fixed?

Frequently, if there is access underneath. The hole is backed, filled and refinished to match.

Will I be able to see the repair?

On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Can you repair a failed DIY repair?

Yes, we do this frequently. We strip it out, deal with any rust and repair it again.

How much does bath repair cost in South Brewham?

Prices start from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your BA10 postcode.

What if the damage is worse than the photos show?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Repairing versus replacing in South Brewham

Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. Our prices are the same across the UK, with no extra for South Brewham. The job itself decides the price: the material, the amount of damage and how many items.

Why choose Surface Doctor in South Brewham

  • Nothing taken out or refitted
  • One-year guarantee on every repair
  • Generally one visit, start to finish
  • Colours mixed by hand to suit your surface

Take a look at our prices page and guide to resurfacing and replacement costs.

Landlords, agents and businesses in South Brewham

Housing associations and facilities teams use us for planned and reactive repairs in Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

When we would advise against a repair

We will always be straight with you, so here’s what a repair cannot fix:

  • Metal that has corroded all the way through
  • Wear across the entire surface, which needs re-enamelling
  • Leaking fittings, which need a plumber

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic

What affects the price in South Brewham

Repairs from £95. You won’t pay by the hour. The price is based on:

  • What kind of damage it is
  • Where the damage is and how we get to it
  • The material
  • The colour and finish to match

A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Getting a price from pictures

Good pictures mean an accurate price. Here’s what helps:

  • Natural light rather than flash
  • Something in shot to show the size
  • Your postcode, so we can check dates
  • Any earlier repairs or coatings

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

What we’re called out for in South Brewham

A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.

These are the problems we’re asked about most:

  • Damage done while the bathroom was being fitted
  • A failed DIY repair that’s discoloured or lifting
  • A chip where the taps sit
  • Holes from dropped items

What your quote should include

  • What happens if the damage is worse than the pictures show
  • How your room will be protected
  • Whether the price covers travel
  • What preparation is included

Choosing a repair company

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a few hours. If anything looks different from your photos, we will talk to you before going ahead.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Let us know about parking or access
  • Let the surface dry out before the visit

How to get a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you are under no obligation.

Get a free quote

Advice

What your bath is made of matters

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

Keeping it looking good

Nothing complicated is needed:

  • Check that an acrylic bath does not move when you stand in it
  • Avoid scourers, wire wool and gritty cream cleaners
  • A dripping tap stains enamel, so fix it early
  • Give the bath a quick rinse after use

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.

Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.