Somerset · England
Bath Repair for North Brewham homes
Damaged bath in North Brewham? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- A chip where the taps sit
- Cracks in an acrylic bath
Bath repair in North Brewham, done in place
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Common call-outs are for deep scratches in acrylic and rust by the waste and overflow, in cast iron enamel, acrylic and roll-top & freestanding.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- North Brewham (BA10)
- County
- Somerset
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Places near North Brewham
Also in North Brewham
Signs you need bath repair in North Brewham
A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
Send us a photo if you notice any of these:
- Deep scratches in acrylic
- Damage beneath the taps
- Chips on the rim or sides
- Rusty patches near the plughole
What to look for in a quote
- How long it needs to cure
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the pictures show
- Who will actually do the work
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- Honest advice, even when it means no job
- Technicians who travel to you, UK-wide
- Fixed prices from your pictures
- No extra charge for your area
Read our pricing or resurfacing vs replacement cost guide.
The process
We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. Allow a few hours, and we’ll keep you posted as we go.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the next day, the bath is ready to use.
Getting ready for the visit
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
Getting a price
Send us a photo of the damage and a wider shot of the whole item, with your BA10 postcode, and we will reply with a fixed quote.
Read more
Questions from North Brewham
Can rust on a bath be repaired?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you repair a hole in a bath?
Often, if there’s access underneath. The hole is backed, filled and refinished to match.
How long before I can use the bath?
Generally within a day, though it depends on what we have done.
Can you repair a crack in an acrylic bath?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
About North Brewham
North Brewham is about 8 miles south-west of Frome, in Somerset. Anywhere in BA10, we come to you. North Brewham is one of 640 towns and villages in Somerset where we work.
We cover every part of BA10 and the streets around it. Streets in the area include James's Hill, Tile Hill and Hammer Street, and we cover them all. We also travel to South Brewham (1 mile south), Witham Friary (3 miles north-east), Kilmington (3 miles east), Yarnfield (4 miles east) and Stourton (4 miles south-east). Within a short drive, we also cover Frome (8 miles north-east), Wells (12 miles north-west), Midsomer Norton (11 miles north), Shepton Mallet (8 miles north-west), Street (15 miles west) and Glastonbury (14 miles west).
What’s near North Brewham
We visit homes around Church of Saint John the Baptist and The Old Red Lion pub, among other places. For rail, the closest station is Bruton station, about 2.5 miles south-west. A little further out are Ballands Castle (4.2 miles south-east) and Four Towers (2.5 miles south). Green spaces nearby include Aaron's Hill.
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Landlord and trade work in North Brewham
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Aftercare tips
How the surface is treated afterwards matters:
- Get any new chip repaired before it rusts
- Rinse it down after each bath
- Put a towel in the bath if you are working above it
- Do not scrub with anything abrasive
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
When a repair is not the answer
A repair is not right for every job, for example:
- Acrylic cracks with no access behind them
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
