Redcar and Cleveland · England
Bath Repair in Lazenby
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Lazenby. Free, fixed quotes from your photos.
- Repairs from £95
- Rusty patches near the plughole
- Damage beneath the taps
About Lazenby
Lazenby is about 2 miles north-east of Eston, in Redcar and Cleveland. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Lazenby is one of 48 towns and villages in Redcar and Cleveland where we work. We work right across the region, from Lazenby to Newcastle upon Tyne (36 miles away).
We work across the TS6 postcode area. That includes homes on High Street, Pasture Lane and Kings Close. Neighbouring places we cover include Lackenby (1 mile south-west), Whale Hill (1 mile south-west), Grangetown (1 mile west), Eston (2 miles south-west) and Normanby (2 miles south-west). Within a short drive, we also cover Redcar (3 miles north-east), Guisborough (4 miles south-east), Marske-by-the-Sea (4 miles east), Skelton-in-Cleveland (5 miles east), Skelton (5 miles east) and Brotton (7 miles east).
Landmarks near Lazenby
Locally, our jobs take us to homes close to Eston Park Academy, Church of St Cuthbert and Wilton Primary Academy and the streets around them. Lazenby’s nearest station is South Bank station, roughly 2.6 miles west. A little further out are Skelton Castle (4.9 miles east) and Kirkleatham Museum (1.6 miles north-east). Not far away are Coatham Marsh and Eston Nab.
About our bath repair in Lazenby
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. We are frequently asked to fix a failed DIY repair that’s discoloured or lifting and a hole punched through by something heavy, on pressed steel enamel, acrylic and roll-top & freestanding.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Lazenby (TS6)
- Area hub
- Redcar and Cleveland
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Your questions about bath repair in Lazenby
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
What areas do you cover?
Across the UK, so Lazenby is covered. Our prices are the same everywhere.
Can you fix rust around the plughole?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is a bath repair permanent?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How invisible is a bath repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Common problems we fix in Lazenby
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Customers normally contact us about:
- Damage done while the bathroom was being fitted
- Rust by the waste and overflow
- Scratches you can feel with a fingernail
- A cracked acrylic bath
Before booking anyone
- Who will actually do the work
- When it can be used again
- Whether there are any call-out or travel charges
- How to care for the finish
Places near Lazenby
Also in Lazenby
Repair or replace: which is better?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Straight answers about what a repair can do
- Colours mixed by hand to suit your surface
- No extra charge for your area
- Typically one visit, start to finish
See our full price list and guide to resurfacing and replacement costs.
What we cannot put right
In fairness, some problems need a different fix:
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we can’t reach from underneath
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Lazenby
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
How it works
We work cleanly and quietly. We protect the area first, then the job itself takes two to three hours for most chips. Before we leave, we explain the curing time and the aftercare.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Advice
Looking after it afterwards
Looking after the surface is easy:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
- Make sure an acrylic bath is firm underfoot
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
About our accreditations · Every repair comes with a one-year guarantee.
