Isle of Anglesey · Wales

Bath chip & crack repair in Llansadwrn, Isle of Anglesey

Bath repair across Llansadwrn and nearby, done in a single visit in most cases.

  • Repairs from £95
  • A cracked acrylic bath
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Llansadwrn?

Llansadwrn and nearby

Llansadwrn is about 3 miles north of Bangor, in Isle of Anglesey. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We cover all 115 towns and villages across Isle of Anglesey, from the larger towns to small villages. You can also see our page for Liverpool, about 52 miles away.

All of LL59 is within our area, from the main roads to the quietest streets. Other places close to Llansadwrn include Cwm Cadnant (1 mile south), Pen-y-garnedd (1 mile west), Hen Bentref Llandegfan (1 mile south-east), Sling (2 miles east) and Wern y Wylan (2 miles north). We also work in nearby towns such as Llangefni (6 miles west), Menai Bridge (3 miles south), Porthaethwy (3 miles south), Amlwch (12 miles north-west), Llanfair Pwllgwyngyll (4 miles south-west) and Benllech (4 miles north-west).

Near you in Llansadwrn

Around Llansadwrn, we work in homes near St Sadwrn's Church and the streets around them. The closest station to Llansadwrn is Bangor (Gwynedd) station, roughly 3.3 miles south of the centre. Other landmarks nearby include Museum of Childhood Memories (3 miles south) and Minffordd Hospital (3.8 miles south). The countryside around Llansadwrn includes Llyn Llwydiarth and Llangoed and Aberlleiniog Common Local Nature Reserve.

Map of Llansadwrn © OpenStreetMap contributors

Bath repair in Llansadwrn without replacing anything

A typical bath repair is a few hours’ work, and you can typically bathe again the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. Common call-outs are for rust by the waste and overflow and chips along the edge of the bath, across acrylic, whirlpool & spa baths and pressed steel enamel.

Whatever the size of the job, you get the same one-year guarantee.

Location
Llansadwrn (LL59)
Area hub
Isle of Anglesey
Guarantee
12 months on all our work
Price
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

Your questions about bath repair in Llansadwrn

What does bath repair cost?

Repairs from £95. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your LL59 postcode.

Can I get a quote without a visit?

Nearly always. If pictures do not show enough, we’ll ask for another angle.

Can you do more than one item on the same visit?

Of course, and it usually saves money. Send pictures of everything together and we will quote them together.

Is the work guaranteed?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Is there any odour?

Expect a mild smell while we are working, which fades afterwards.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can you repair a failed DIY repair?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

Can rust on a bath be repaired?

Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.

Signs you need bath repair in Llansadwrn

A cracked acrylic bath typically wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex.

Most people get in touch when they notice one of these:

  • A cracked acrylic bath
  • Rust by the waste and overflow
  • A chipped rim or side
  • Snagging damage from a refit

What to look for in a quote

  • Whether cleaning and preparation are in the price
  • How long the guarantee is and what it covers
  • How to look after the finish
  • Whether the price is fixed and includes VAT

How to compare quotes

Landlord and trade work in Llansadwrn

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Why repair rather than replace?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. We charge the same wherever you are, so there’s no premium for Llansadwrn. What changes the price is the job itself: the material, the amount of damage and how many items.

Why Llansadwrn clients choose us

  • Normally one visit, start to finish
  • Repair technicians who travel to you, UK-wide
  • Accredited with CHAS, Constructionline and SafeContractor
  • Fixed prices from your photos

See our full price list or resurfacing vs replacement cost guide.

How the visit works

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for two to three hours for most chips from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, normally the day after.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Plan for the room to be out of bounds to pets and children
  • Make sure the room can be ventilated

How to get a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Get a free quote

Read more

How to look after the repair

Good habits make a big difference to how long a repair lasts:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Give the bath a quick rinse after use
  • Do not scrub with anything abrasive
  • Check that an acrylic bath does not move when you stand in it

Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.

Prices and what affects them

Repairs from £95. You will not pay by the hour. The price is based on:

  • How easy the damage is to reach
  • What kind of damage it is
  • The colour and finish to match
  • The material

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Getting a price from photos

It only takes a minute to photograph the damage. Please include:

  • Your postcode, so we can check dates
  • One sharp close-up of the damage
  • A wider photo showing the whole bath
  • Any details about the material

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.