Derbyshire · England
Bath chip & crack repair in Lydgate, Derbyshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Lydgate and across Derbyshire. Free, fixed quotes from your photos.
- Repairs from £95
- Chips caused by builders
- A chip where the taps sit

Repair or replace: which is better?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in a single visit. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- One price list for the entire UK
- Work done at your home or business
- A fixed quote before booking
- A year’s guarantee on all work
Read our prices page or bath cost comparison.
Bath repair in Lydgate, done in place
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Whether it’s a cracked acrylic bath and damage done while the bathroom was being fitted, we can help.
We stand behind the work with a one-year guarantee.
- Where
- Lydgate (S18)
- County
- Derbyshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026

Where we work around Lydgate
Lydgate is about 3 miles west of Dronfield, in Derbyshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Lydgate is one of 532 places in Derbyshire where we work. You can also see our page for Manchester, about 31 miles away.
Every address in S18 is within our area, from the main roads to the quietest streets. With the B6054 close by, Lydgate is easy for our technicians to reach. Close by, we cover Horsleygate (1 mile south-east), Holmesfield (1 mile east), Millthorpe (1 mile south), Cartledge (1 mile east) and Unthank (1 mile south). Larger places within reach include Chesterfield (6 miles south-east), Dronfield (3 miles east), Bolsover (11 miles south-east), Staveley (8 miles east), Matlock (11 miles south) and Clay Cross (10 miles south-east).
What’s near Lydgate
Typical jobs here are in homes near The Angel pub, Penny Acres Primary School and King Ecgbert School and the streets around them. The closest station to Lydgate is Dore & Totley station, roughly 2.4 miles north-east of the centre. Other landmarks nearby include Dronfield Urban District (3 miles east) and Abbeydale Industrial Hamlet (2.8 miles north). The countryside around Lydgate includes Blacka Moor Nature Reserve and Totley Moor.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, and we finish by cleaning up and talking you through the result.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can normally use the bath the following day.
How to prepare
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
- Let the surface dry out before the visit
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you’re under no obligation.
Related advice
Your questions about bath repair in Lydgate
How much does bath repair cost in Lydgate?
Repairs from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your S18 postcode.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. Then we’ll agree a date.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote and the next dates we have.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
How to look after the repair
Most damage we see is avoidable. A few tips:
- Fix dripping taps early to stop staining and limescale
- Check that an acrylic bath doesn’t move when you stand in it
- Use a soft cloth and washing-up liquid for everyday cleaning
- Keep metal cans and razors off the surface
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Landlords, agents and businesses in Lydgate
For anyone letting property in or around Lydgate, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
We carry out planned and one-off repairs for housing associations and facilities teams in Derbyshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
When we’d advise against a repair
Before booking, it’s worth knowing the limits too:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Lydgate
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
Do you need bath repair in Lydgate?
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.
Signs it’s time to call us include:
- Deep scratches in acrylic
- A chipped rim or side
- Damage beneath the taps
- A cracked acrylic bath
Questions to ask before you book
- Aftercare advice
- What protection goes down before work starts
- Is the price fixed, and does it include VAT?
- What happens if they find more damage
What else we do in Lydgate
About our accreditations · Every repair comes with a one-year guarantee.

