Cumbria · England
Bath Repair in Natland
Problem with your bath in Natland? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Rust by the waste and overflow
- A chip where the taps sit
About Natland
Natland is about 2 miles south of Kendal, in Cumbria. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Natland is one of 438 towns and villages in Cumbria where we work. Our nearest city page is Leeds, about 59 miles away.
Here we cover the LA9 postcode area. Whether you live on Abbey Drive, Helm Lane and Longmeadow Lane or anywhere nearby, we can come to you. We also travel to Prizet (1 mile west), Halfpenny (1 mile south-east), Sedgwick (1 mile south), Summerlands (2 miles south-east) and Brigsteer (3 miles west). Larger places within reach include Windermere (9 miles north-west), Grange-over-Sands (10 miles south-west), Ambleside (13 miles north-west), Bowness-on-Windermere (9 miles north-west), Sedbergh (9 miles east) and Kentrigg (3 miles north).
Near you in Natland
We visit homes around The Punch Bowl pub, St Mark's CofE Primary School and Kirkbie Kendal School, among other places. For rail, the closest station is Oxenholme Lake District station, roughly 0.8 miles north-east of the centre. Further afield, we also cover the area around Sizergh Castle (1.7 miles south-west) and Westmorland General Hospital (0.7 miles north). The countryside around Natland includes Scout Scar and Cunswick Tarn.
Bath repair in Natland, done in place
A damaged bath does not have to mean a new bathroom. Our technicians fill, shape and refinish the damage, with the colour mixed on site. Typical jobs include chips on the rim or sides and a kit repair that didn’t last, across cast iron enamel, roll-top & freestanding and pressed steel enamel.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Where
- Natland (LA9)
- County
- Cumbria
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
How it works
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a morning or an afternoon, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the following day.
Preparing for the visit
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
What affects the price in Natland
Prices start from £95. A fixed quote means you know the cost before you book. We take into account:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- How hard the colour is to match
Our prices are the same across the UK, with no extra for Natland. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
Good pictures mean an accurate price. Here’s what helps:
- Natural light rather than flash
- One picture of the entire bath
- Details of any past repairs
- A coin beside the damage so we can judge size
Email us a photo of the damage and a wider shot of the whole item, with your LA9 postcode, and we’ll reply with a fixed quote.
When to call us in Natland
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Signs it’s time to call us include:
- Scuffs and scratches in the surface
- Impact holes in acrylic
- A cracked acrylic bath
- Chips caused by builders
Comparing quotes
- When it can be used again
- What preparation is included
- How the room is protected while they work
- The length of the guarantee and what it covers
Landlords, agents and businesses in Natland
Landlords, letting agents and housing providers in Natland use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For anyone letting property in or around Natland, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
Repairing versus replacing in Natland
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Colours mixed by hand to suit your surface
- A fixed quote before booking
- Technicians who travel to you, UK-wide
- No extra charge for your area
See our full price list or bath cost comparison.
Also in Natland
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Do not leave razors or cans standing in the bath
- Rinse it down after each bath
- A dripping tap stains enamel, so fix it early
- Stick to mild cleaners and a soft cloth
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Natland questions
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
Will the repair show?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
How do I get a price for bath repair in Natland?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can rust on a bath be repaired?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
About our accreditations · Every repair comes with a one-year guarantee.
