Swansea · Wales
Bath chip & crack repair in Parkmill, Swansea
Damaged bath in Parkmill? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
When to call us in Parkmill
A cracked acrylic bath usually wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex.
Send us a picture if you notice any of these:
- Impact holes in acrylic
- A kit repair that didn’t last
- Scratches you can feel with a fingernail
- Snagging damage from a refit
Comparing quotes
- What happens if they find more damage
- What preparation is included
- How the colour is matched
- Whether a trained technician does the job
Bath repair in Parkmill without replacing anything
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Common call-outs are for an old repair that has yellowed or come loose and scratches you can feel with a fingernail, on acrylic, whirlpool & spa baths and cast iron enamel.
Every job is backed for twelve months. We return to put right any problem with the work.
- Where
- Parkmill (SA3)
- Region
- Swansea
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath repair costs
Prices start from £95. We price every job individually, from your photos. What matters most is:
- Any earlier repairs that need removing first
- The size and number of damaged areas
- The material and finish
- Whether we combine several jobs
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
When you take your photos, a few simple things make all the difference:
- Any details about the material
- A coin beside the damage so we can judge size
- One picture of the whole bath
- A clear, close picture of the problem area
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
More services for Parkmill
Repairs by material
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a few hours, depending on the damage from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the next day, the bath is ready to use.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
How to get a price
For a price in Parkmill, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Cracks in acrylic we can’t reach from underneath
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Give the bath a quick rinse after use
- Get a dripping tap fixed promptly
- Don’t leave razors or cans standing in the bath
- Avoid scourers, wire wool and gritty cream cleaners
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
Where we work around Parkmill
Parkmill is about 6 miles south of Gorseinon, in Swansea. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 153 places in Swansea.
Our visits in SA3 work the same way as everywhere else we cover. You’ll find streets such as Sandy Lane and Lunnon Close. Other places close to Parkmill include Lunnon (1 mile north-east), Sandylane (1 mile south-east), Southgate (1 mile south-east), Ilston (1 mile north-east) and Pennard (1 mile east). We also work in nearby towns such as Swansea (7 miles north-east), Castle (7 miles east), Morriston (10 miles north-east), Mount Pleasant (7 miles north-east), Gorseinon (6 miles north) and Dyfaty (7 miles north-east).
Local landmarks in Parkmill
We visit homes around Bishopston Comprehensive School, Pennard Primary School and Pennard Church of St Mary. A little further out are Park Mill (less than half a mile east) and Fairwood Hospital (3.2 miles north-east). The countryside around Parkmill includes Broad Pool and Cefn Bryn.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
FAQs for Parkmill
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can you repair something that’s been repaired before?
In most cases. The old repair comes out first.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Do you cover Parkmill?
Yes. We cover the whole UK and travel to Parkmill. Send photos and we’ll quote, or call 0345 017 0787.
Is a holed acrylic bath repairable?
Normally. Photos of the hole and the underside help us check.
What happens next?
We review the photos and send a fixed quote.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
About our accreditations · Every repair comes with a one-year guarantee.
