Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Pelcomb Bridge, Pembrokeshire
Full bath re-enamelling and resurfacing for homes and businesses in Pelcomb Bridge and across Pembrokeshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Stains that will not shift
How we handle bath re-enamelling in Pelcomb Bridge
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for several chips and rust patches and an original cast iron bath that needs restoring, on basins & shower trays, acrylic baths and Victorian roll-tops.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Pelcomb Bridge (SA62)
- Area hub
- Pembrokeshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
It helps to know what we cannot do:
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
When to call us in Pelcomb Bridge
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
People generally call us after spotting something like this:
- A roll-top that’s seen better days
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
Before you book anyone
- Aftercare advice
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- How your room will be protected
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
How it works
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to a full day, tidy-up included.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
If you manage property in Pelcomb Bridge, we will quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Don’t leave a chip unrepaired
- Don’t let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Your questions about bath re-enamelling in Pelcomb Bridge
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
How long will the bath be out of use?
Typically one day, with the bath ready the following day. A badly pitted bath can need a second day.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Do you work in Pelcomb Bridge?
Yes. We cover the entire UK and come to Pelcomb Bridge and the rest of Pembrokeshire. Send photos and we’ll quote, or call 0345 017 0787.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Which areas do you work in?
Across the UK, and that includes Pelcomb Bridge. Our prices are the same everywhere.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
About Pelcomb Bridge
Pelcomb Bridge is about 2 miles north-west of Haverfordwest, in Pembrokeshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Pelcomb Bridge is one of 223 towns and villages in Pembrokeshire where we work.
Postcode districts we cover here: SA62. If you are just outside Pelcomb Bridge, we cover Pelcomb Cross (1 mile north-west), Lambston (2 miles west), Camrose (2 miles north), Keeston (2 miles north-west) and Wolfsdale (3 miles north). We also work in nearby towns such as Milford Haven (7 miles south), Pembroke (10 miles south), Pembroke Dock (9 miles south), Fishguard (12 miles north), Green (10 miles south) and Goodwick (13 miles north).
Around Pelcomb Bridge
Around Pelcomb Bridge, we work in homes near Haverfordwest High VC School and The Rising Sun Inn and the streets around them. The closest station to Pelcomb Bridge is Haverfordwest station, about 1.9 miles south-east of the centre. A little further out are Withybush General Hospital (1.6 miles east) and Prendergast Castle (1.6 miles east). For a walk, there’s Rogeston Mount.
Places near Pelcomb Bridge
More services for Pelcomb Bridge
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
What affects the price in Pelcomb Bridge
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Access to the area
- The type of damage
- Doing more than one item at once
- Previous DIY repairs that have to come out
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
The better the pictures, the more accurate the price. Here’s what we find most useful:
- One picture of the whole bath
- Natural light rather than flash
- Where you are, by postcode
- A coin beside the damage so we can judge size
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
