Aberdeenshire · Scotland
Bath Repair for Pittulie homes
Problem with your bath in Pittulie? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- An old repair that has yellowed or come loose
About our bath repair in Pittulie
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. Our technicians work on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding, and people most frequently call us about scuffs and scratches in the surface and chips caused by builders.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Pittulie (AB43)
- Region
- Aberdeenshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
The process
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for a morning or an afternoon. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Open a window if you can
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
How to get a price
To get a price, send a couple of photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Advice
Our work in Pittulie
Pittulie is about 2 miles north-west of Fraserburgh, in Aberdeenshire. From the centre of Pittulie to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 161 towns and villages in Aberdeenshire.
Our repair technicians cover all of AB43. If you are just outside Pittulie, we cover Sandhaven (1 mile south-east), Rosehearty (2 miles west), Broadsea (2 miles east), Fraserburgh (2 miles south-east) and Memsie (3 miles south). Further out, we also cover Mintlaw (12 miles south), Longside (13 miles south), Strichen (8 miles south), Gardenstown (10 miles west), St Fergus (13 miles south-east) and Maud (12 miles south).
What’s near Pittulie
Locally, our jobs take us to homes close to Fraserburgh Academy. Other landmarks nearby include Pittulie Castle (1 mile west) and Fraserburgh Heritage Centre (2.3 miles east).
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Repair or replace in Pittulie?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
What you get with us
- Work done at your home or business
- Fixed prices from your pictures
- No need to remove anything
- We leave the room as we found it
Take a look at our full price list and bath cost comparison.
Landlord and trade work in Pittulie
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Common problems we fix in Pittulie
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
Clients normally contact us about:
- Rust spots around the plughole
- Damage done while the bathroom was being fitted
- Cracks in an acrylic bath
- Chips under the taps
What to look for in a quote
- Whether the price is fixed and includes VAT
- How soon you can use it again
- The length of the guarantee and what it covers
- What happens if the damage is worse than the photos show
Nearby places to Pittulie
What else we do in Pittulie
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
How we price bath repair
Repairs from £95. You will know the full cost before booking. We look at:
- The material
- How easy the damage is to reach
- Whether we combine several jobs
- Unusual colours or finishes
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Getting a price from photos
A couple of clear pictures is all it takes. It helps if you send:
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- The material, if you know it
- A wider photo showing the entire bath
For a price in Pittulie, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Questions from Pittulie
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Is a holed acrylic bath repairable?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
When we’d advise against a repair
Before booking, it’s worth knowing the limits:
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
Send us pictures and we will tell you honestly.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
