Aberdeenshire · Scotland
Bath Repair in Memsie
Fixed-price bath repair in Memsie and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- A hole punched through by something heavy
- Rust by the waste and overflow
How we handle bath repair in Memsie
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the following day. Common call-outs are for chips along the edge of the bath and rusty patches near the plughole, across roll-top & freestanding, acrylic and pressed steel enamel.
Big or small, it’s backed by a one-year guarantee in Memsie and across Aberdeenshire.
- Where
- Memsie (AB43)
- Region
- Aberdeenshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, and we leave the room as we found it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
Ask for a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Read more
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair will not do:
- Wear across the entire surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Common problems we fix in Memsie
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Look out for these signs:
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
- Damage beneath the taps
What your quote should include
- Whether they match the colour on site
- What protection goes down before work starts
- Who will actually do the work
- What the guarantee covers, and for how long
For landlords and businesses
For anyone letting property in or around Memsie, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Repairs by material
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
How to look after the repair
Once the work has cured, treat it gently:
- Clean with warm water and a mild detergent
- Put a towel in the bath if you’re working above it
- Keep abrasive pads and gritty cleaners away from the bath
- Ensure an acrylic bath is firm underfoot
A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Places near Memsie
Also in Memsie
What bath repair costs
Prices start from £95. We price every job individually. The main factors are:
- How many areas need work
- What the surface is made of
- Previous DIY repairs that have to come out
- The colour and finish to match
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Send photos for a quote
Two or three clear pictures are normally enough. It helps if you send:
- Daylight if possible, and no flash reflection
- Any details about the material
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
For a price in Memsie, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Memsie questions
Do you come to Memsie?
Yes. We cover the entire UK and come to Memsie. Send us photos for a fixed quote, or call 0345 017 0787.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
It’s been repaired before. Can you still fix it?
Normally, yes. We remove the old repair before doing a new one.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
What does bath repair cost?
Repairs from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Something went through my bath. Can it be fixed?
Generally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Memsie and nearby
Memsie is about 3 miles south-west of Fraserburgh, in Aberdeenshire. Our technicians come to homes and businesses in Memsie, so nothing has to leave your home. Memsie is one of 161 towns and villages in Aberdeenshire we cover.
We cover every part of AB43. Jobs here include addresses on Cairn Close, Westcroft Close and Muir Road. Neighbouring places we cover include Fraserburgh (3 miles north-east), Sandhaven (3 miles north), Broadsea (3 miles north), Pittulie (3 miles north) and Rosehearty (4 miles north-west). We also work in nearby towns such as Peterhead (14 miles south-east), Roanheads (14 miles south-east), Clerkhill (14 miles south-east), Port Henry (14 miles south-east), Mintlaw (9 miles south) and Longside (10 miles south-east).
What’s near Memsie
Well-known places in the area include Fraserburgh Heritage Centre (3.4 miles north-east) and Fraserburgh Hospital (2.7 miles north-east). Open spaces near Memsie include Mormond Hill.
About our accreditations · Every repair comes with a one-year guarantee.
