Flintshire · England
Bath Repair in Pulford
Fixed-price bath repair in Pulford and the surrounding area, typically in one visit and guaranteed for a year.
- Repairs from £95
- Chips under the taps
- Rusty patches near the plughole
Pulford: your questions answered
Can you price it without visiting?
Normally, yes. Clear pictures let us give you a fixed price without visiting.
What happens after I send pictures?
You will get a fixed quote back. You are under no obligation.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What about rust by the waste?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
How we handle bath repair in Pulford
Most of our bath repairs take a few hours, and you can typically bathe again the day after. There is no need to book a plumber or tiler, because the bath doesn’t move. Typical jobs include scratches you can feel with a fingernail and a chip where the taps sit, in pressed steel enamel, roll-top & freestanding and cast iron enamel.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Pulford (CH4)
- Region
- Flintshire
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Other services in Pulford
What happens on the day
Your technician turns up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes a morning or an afternoon, and we leave the room as we found it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.
Read more
Should you replace it?
People often assume a cracked or chipped bath has to come out. Generally it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Rooms protected and left tidy
- We’ll tell you if it’s not worth repairing
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
Read our full price list and guide to resurfacing and replacement costs.
Common problems we fix in Pulford
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
You may need us if you’ve spotted:
- Rusty patches near the plughole
- Scratches you can feel with a fingernail
- Hairline or through cracks in acrylic
- Damage beneath the taps
Before booking anyone
- How long the guarantee is and what it covers
- How long it needs to cure
- What happens if the damage is worse than the pictures show
- What aftercare is recommended
Aftercare tips
Looking after the surface is easy:
- Don’t leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Our work in Pulford
Pulford is about 5 miles south of Chester, in Flintshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover 139 places in Flintshire. Our nearest city page is Liverpool, about 20 miles away.
We cover every part of CH4. Local streets include Ivy Court, Burganey Court and Castlehill, all of which we cover. If you are just outside Pulford, we cover Lavister (1 mile south), Darland (1 mile south), Cuckoo's Nest (1 mile north-east), Rossett (1 mile south) and Trevalyn (1 mile south). Further out, we also cover Connah's Quay (8 miles north-west), Buckley (7 miles north-west), Bwcle (7 miles north-west), Flint (12 miles north-west), Saltney (4 miles north) and Mold (9 miles west).
Landmarks near Pulford
Typical jobs here are in homes near St Peter's CIW Voluntary Controlled Primary School, The Nags Head pub and Darland High School. The closest station to Pulford is Caergwrle station, roughly 4.2 miles west of the centre. Further afield, we also cover the area around Broughton Shopping Park (3.5 miles north-west) and Trevalyn Manor (1.6 miles south). Open spaces near Pulford include The Flash and Caer Estyn.
When we’d advise against a repair
We won’t take on work that will not last, so these are the limits:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we cannot reach from underneath
- Metal that has corroded all the way through
If in doubt, send photos and we will say what we think.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
What bath repair costs
Prices start from £95. You will not pay by the hour. The price depends on:
- How easy the damage is to reach
- How many areas need work
- Whether we combine several jobs
- The material
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Details of any past repairs
- Where you are, by postcode
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
