East Riding of Yorkshire · England
Bath Repair for Roos homes
Bath repair in and around Roos: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A chipped rim or side
- Rust by the waste and overflow
Repair or replace: which is better?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair fixes just the damaged area in a single visit. Prices start from £95. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Normally one visit, start to finish
- CHAS and Constructionline accredited
- We leave the room as we found it
- Straight answers about what a repair can do
Take a look at our prices page and bath cost comparison.
About our bath repair in Roos
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include a cracked acrylic bath and impact holes in acrylic, across acrylic, cast iron enamel and whirlpool & spa baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Roos (HU12)
- County
- East Riding of Yorkshire
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we can’t put right
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
- A steel bath rusted through
Send us photos and we’ll tell you honestly.
Materials we work on in Roos
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a morning or an afternoon from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
- Let us know which floor the room is on
How to get a price
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
Prices and what affects them
Prices start from £95. You won’t pay by the hour. The price depends on:
- How many items we do on one visit
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- Access to the area
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
When you take your pictures, these tips help us give you a firm price:
- A photo taken from further back
- A coin beside the damage so we can judge size
- Any details about the material
- A close-up of the damage, in focus
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
When to call us in Roos
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.
Look out for any of the following:
- A chip where the taps sit
- Snagging damage from a refit
- Rust by the waste and overflow
- A chipped rim or side
Comparing quotes
- How long the guarantee is and what it covers
- What happens if the damage is worse than the pictures show
- When it can be used again
- What protection goes down before work starts
Looking after it afterwards
Simple care helps the repair last. We recommend:
- If an acrylic bath flexes, have its feet adjusted
- Fix dripping taps early to stop staining and limescale
- Rinse it down after each bath
- Put a towel in the bath if you are working above it
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Where we work around Roos
Roos is about 12 miles east of Kingston upon Hull, in East Riding of Yorkshire. We travel to clients in Roos, so there is no workshop to go to. We cover 299 places in East Riding of Yorkshire. Our nearest city page is Leeds, about 62 miles away.
We work across HU12. From Main Street, Hinch Garth and Beechwood Views or a nearby road, we can come to you. Nearby, we also work in Tunstall (1 mile north-east), Rimswell (2 miles south-east), Owstwick (2 miles north-west), Hilston (2 miles north) and Halsham (2 miles south-west). Further out, we also cover Cottingham (15 miles west), Hornsea (12 miles north-west), Hedon (6 miles west), Withernsea (4 miles south-east), Owthorne (3 miles south-east) and Anlaby Common (15 miles west).
Local landmarks in Roos
Locally, our jobs take us to homes close to Roos Church of England Voluntary Controlled Primary School and Church of All Saints and the streets around them. Nearby you will also find Withernsea Hospital (3.6 miles south-east) and Burstwick Castle (4.5 miles west).
Also in Roos
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Questions from Roos
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do you work in Roos?
Yes, we do. We send a technician to Roos for every job, with no extra charge for travel.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
How invisible is a bath repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
About our accreditations · Every repair comes with a one-year guarantee.
