Hampshire · England
Bath chip & crack repair in Rowner, Hampshire
We travel to Rowner for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
About our bath repair in Rowner
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. If you are dealing with rust spots around the plughole and chips along the edge of the bath, we can typically put it right, whatever the material.
Big or small, it’s backed by a one-year guarantee in Rowner and across Hampshire.
- Where
- Rowner (PO13, PO14)
- Region
- Hampshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can normally use the bath the following day.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
- Open a window if you can
Getting a price
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
Landlord and trade work in Rowner
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
If you manage property in Rowner, we will quote for several properties at once. Just send photos for each address and we will price them together.
Repairs by material
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Do you need bath repair in Rowner?
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
Most people contact us after spotting something like this:
- Scuffs and scratches in the surface
- Chips under the taps
- A chipped rim or side
- A hole punched through by something heavy
Comparing quotes
- Whether the price covers travel
- How soon you can use it again
- Aftercare advice
- What protection goes down before work starts
Also near Rowner
Also in Rowner
Rowner: your questions answered
How do I get a price for bath repair in Rowner?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
How long before I can use the bath?
Usually within a day, depending on the repair.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Where we work around Rowner
Rowner is about 2 miles north-west of Gosport, in Hampshire. Our technicians come to homes and businesses in Rowner and nearby villages, so nothing has to leave your home. We work in 683 places in Hampshire, from the larger towns to small villages. Our nearest city page is London, about 66 miles away.
Jobs in PO13 and PO14 are booked in the same way as anywhere else. Whether you live on Wych Lane, Camp Road and Keyes Road or a nearby road, a technician can come to you. Nearby, we also work in Bridgemary (1 mile south-east), Peel Common (1 mile west), Crofton (1 mile west), Elson (1 mile south-east) and Lee-on-the-Solent (2 miles south-west). Within a short drive, we also cover Havant (9 miles east), Eastleigh (12 miles north-west), Horndean (9 miles north-east), Chandler's Ford (15 miles north-west), Hedge End (9 miles north-west) and Waterlooville (8 miles north-east).
Near you in Rowner
We visit homes around Holbrook Primary School, The Green Dragon pub and St Matthew's, among other places. Other local landmarks include Bridgemary School (under half a mile north-east) and Baycroft School (1.3 miles west). The nearest railway station is Fareham station, about 2.3 miles north. Further afield, we also cover the area around Gosport War Memorial Hospital (2.3 miles south-east) and Portchester Castle (2.9 miles east). Open spaces near Rowner include West of the River Alver and Portsdown Hill.
Aftercare tips
Nothing complicated is needed:
- Fix dripping taps early to stop staining and limescale
- Clean with warm water and a mild detergent
- Don’t leave a fresh chip for long
- Store metal items away from the bath
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
What a repair cannot fix
We will always be straight with you, so here’s what a repair won’t do:
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
- A bath that moves underfoot, until its support is fixed
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
How we price bath repair
Prices start from £95. We give every job a fixed price from photos. These are the things that affect it:
- How much damage there is
- How hard the colour is to match
- What the surface is made of
- Whether old repairs or coatings need taking off
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your pictures
You can take the photos on your phone, there’s no need for anything special. Just make sure we can see:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- The material, if you know it
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
