Perth and Kinross · Scotland
Bath chip & crack repair in Carnbo, Perth and Kinross
Our repair technicians come to Carnbo for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A chipped rim or side
- Rust by the waste and overflow
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Bath repair in Carnbo without replacing anything
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We work on whirlpool & spa baths, cast iron enamel and pressed steel enamel, and common reasons people contact us are rust by the waste and overflow and chips along the edge of the bath.
Every repair is covered by a one-year guarantee, wherever you are in Perth and Kinross.
- Where
- Carnbo (KY13)
- Region
- Perth and Kinross
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Carnbo
What else we do in Carnbo
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
- Store metal items away from the bath
- Stick to mild cleaners and a soft cloth
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Where we work around Carnbo
Carnbo is about 10 miles north of Dunfermline, in Perth and Kinross. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Carnbo is one of 107 towns and villages in Perth and Kinross we cover. You can also see our page for Edinburgh, about 22 miles away.
Postcode districts we cover here: KY13. Close by, we cover Crook of Devon (2 miles south-west), Balado (3 miles east), Rumbling Bridge (3 miles south-west), Pool of Muckhart (4 miles south-west) and Kinross (4 miles east). Within a short drive, we also cover Perth (13 miles north), Auchterarder (9 miles north-west), Letham (13 miles north), Scone (15 miles north), Tulloch (14 miles north) and Oakbank (13 miles north).
Landmarks near Carnbo
Well-known places in the area include Cleish Castle (3.6 miles south-east). For a walk, there is Loch Glow and Innerdouny Hill.
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Landlord and trade work in Carnbo
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
If you manage property in Carnbo, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Why repair rather than replace?
Replacing a fitted bath generally means a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in a single visit. Our bath repair starts from £95. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- One visit for most repairs
- Free fixed quotes from pictures
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
Take a look at our pricing or resurfacing vs replacement cost guide.
Common questions in Carnbo
How much does bath repair cost in Carnbo?
Repairs from £95. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
How long before I can use the bath?
Normally within a day, depending on the repair.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you repair a hole in a bath?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Are there extra charges for Carnbo?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there is more, we’ll tell you before starting.
Signs you need bath repair in Carnbo
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
Contact us if you’ve noticed:
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
Comparing quotes
- How to care for the finish
- How the room is protected while they work
- A fixed quote, and whether VAT is included
- Whether the price covers travel
What we do, step by step
There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a few hours.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Tell us about any previous repairs or coatings
- Ensure the area is dry
- Let us know which floor the room is on
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
How we price bath repair
Prices start from £95. We charge the same across the UK, including Carnbo. The price reflects:
- What the surface is made of
- Doing more than one item at once
- How easy the damage is to reach
- Unusual colours or finishes
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
Phone pictures are fine. Just make sure we can see:
- A picture taken from further back
- Something in shot to show the size
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
The quickest way to a price is to send two or three photos through our quote form or call us. We will say right away if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
