Pembrokeshire · Wales
Bath Repair in Saundersfoot
Bath repair in Saundersfoot without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Repairs from £95
- Cracks in an acrylic bath
- Chips along the edge of the bath
How the visit works
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
Getting a price
Email us photos of the damage and one of the entire item, and tell us you’re in Saundersfoot, and we will reply with a fixed quote.
Related advice
Bath repair at your home in Saundersfoot
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, usually in a single visit. Typical jobs include snagging damage from a refit and damage beneath the taps, on cast iron enamel, acrylic and pressed steel enamel.
All of our repairs are guaranteed for twelve months in Saundersfoot and everywhere else. We return to put right any problem with the work.
- Where
- Saundersfoot (SA69)
- Region
- Pembrokeshire
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Keep metal cans and razors off the surface
- If an acrylic bath flexes, have its feet adjusted
- Don’t leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Covering Saundersfoot
Saundersfoot is about 13 miles south-east of Haverfordwest, in Pembrokeshire. From the centre of Saundersfoot to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Saundersfoot is one of 223 towns and villages in Pembrokeshire we cover.
We cover every part of SA69 and the streets around it. Local streets include High Street, Pennant Avenue and Westfield Road, and we cover them all. With the B4316 close by, Saundersfoot is easy for our repair technicians to reach. Neighbouring places we cover include The Valley (1 mile west), Wooden (1 mile west), Hill (1 mile north-west), Kingsmoor (1 mile north-west) and Pentlepoir (1 mile north-west). Further out, we also cover Haverfordwest (13 miles north-west), Milford Haven (14 miles west), Pembroke (9 miles west), Pembroke Dock (10 miles west), The Marsh (13 miles north-west) and Dinbych-y-Pysgod (3 miles south).
Around Saundersfoot
Our clients here include homes close to Saundersfoot C.P. School, Gower Hotel and St Issell's Church. The closest station to Saundersfoot is Saundersfoot station, about 0.9 miles north-west of the centre. Nearby you will also find Tenby Museum and Art Gallery (2.7 miles south) and Hean Castle Motte (0.7 miles north-east). The countryside around Saundersfoot includes Broadfield.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
What we cannot put right
We will not take on work that will not last, so these are the limits:
- Water coming from the waste or taps rather than the bath
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
Send us pictures and we will tell you honestly.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
Saundersfoot: your questions answered
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
How long before I can use the bath?
Generally within a day, though it depends on what we have done.
Can you repair a hole in a bath?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can I fix it myself?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Landlords, agents and businesses in Saundersfoot
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
When to call us in Saundersfoot
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water sits around them, and any chip there soon rusts.
It’s worth getting a quote if you see:
- Deep scratches in acrylic
- Chips caused by builders
- A hole punched through by something heavy
- A chipped rim or side
Comparing quotes
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
- Whether the price covers travel
- How the room is protected while they work
Places near Saundersfoot
Also in Saundersfoot
Repair or replace: which is better?
A new bath brings a chain of other jobs: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why choose Surface Doctor in Saundersfoot
- We leave the room as we found it
- We will tell you if it’s not worth repairing
- Nothing taken out or refitted
- Every repair guaranteed for a year
Take a look at our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
