Bristol · England

Bath Repair in Sea Mills

We travel to Sea Mills for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.

Repairs from £95
A chipped rim or side
Deep scratches in acrylic

Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Sea Mills

Call 0345 017 0787

Get a free quote

Bath repair in Sea Mills, done in place

Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Our technicians work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and common reasons people get in touch are an old repair that has yellowed or come loose and a chip where the taps sit.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.

Where: Sea Mills (BS9, BS11)
County: Bristol
Cover: One year on every repair
Price: From £95. Free and fixed, from your photos
Phone: 0345 017 0787
Last updated: 23 October 2026

Rusty chip next to a bath plughole, before and after repair

About Sea Mills

Sea Mills is about 3 miles north-west of Bristol, in Bristol. Jobs in Sea Mills are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We cover all 89 towns and villages in Bristol. We work right across the region, from Sea Mills to Birmingham (about 75 miles away).

Here we cover the BS9 and BS11 postcode area. Jobs here include addresses on Cheyne Road, Dingle Road and Coombe Lane. You’ll find Sea Mills on the A4162, so it’s easy for us to reach. Other places close to Sea Mills include Kingsweston (1 mile south-west), Sneyd Park (1 mile south), Stoke Bishop (1 mile south-east), Coombe Dingle (1 mile north) and Westbury-on-Trym (1 mile north-east). We also work in nearby towns such as Bristol (3 miles south-east), Montpelier (3 miles south-east), Easton (4 miles south-east), Bedminster (4 miles south-east), Canon's Marsh (3 miles south-east) and Southville (3 miles south-east).

Landmarks near Sea Mills

Typical jobs here are in homes near Kingsweston School, Oasis Academy Brightstowe and Canford Park, among other places. Also close by are Stoke Bishop Church of England Primary School (within half a mile south-east) and St Edyth's Church (less than half a mile west). Sea Mills’s nearest station is Sea Mills station, about 0.5 miles south-west of the centre. Nearby you’ll also find Brentry Hospital (1.8 miles north-east) and Bristol Castle (3.1 miles south-east). Not far away are Brandon Hill and Portbury Ashlands.

Map of Sea Mills © OpenStreetMap contributors

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

Prices and what affects them

Prices start from £95. You will know the full cost before you book. We look at:

The colour and finish to match
How easy the damage is to reach
Doing more than one item at once
The type of damage

We charge the same wherever you are, with no extra for Sea Mills. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Quotes from your pictures

Photographing the damage takes a minute. Please include:

A close-up of the damage, in focus
Good light, ideally daylight, without flash glare
Any details about the material
A wider photo showing the whole bath

For a price in Sea Mills, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Repair or replace in Sea Mills?

A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why us?

One price list for the whole UK
Every repair guaranteed for a year
Technicians who travel to you, UK-wide
Fixed prices from your photos

See our pricing and resurfacing vs replacement cost guide.

FAQs for Sea Mills

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Do you repair coloured baths?

Yes, coloured baths are no problem. The colour is tinted by hand on the day.

Can you redo an old repair?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Is a bath repair permanent?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

I rent my home. Can I book you?

We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

How much does bath repair cost in Sea Mills?

Prices start from £95. Because every job differs, we price from photos. You’ll get a fixed figure before booking.

Do you cover the whole of Bristol?

All of Bristol, and the rest of the UK. There is no extra charge for travel.

Repairs by material

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

For landlords and businesses

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

What we are called out for in Sea Mills

Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.

Signs it’s time to call us include:

Chips along the edge of the bath
A chip where the taps sit
Holes from dropped items
Rust by the waste and overflow

Before booking anyone

Whether the price covers travel
How the colour is matched
What protection goes down before work starts
What prep work is covered

Our hiring checklist

How the visit works

We agree an arrival time beforehand. On site, it takes two to three hours for most chips for most jobs. We leave the room clean and you’ll know when it can be used.

We start by cleaning the damage and taking out loose enamel and rust.
Next we fill the damage and sand it smooth and level.
We tint the finish on the day to suit your bath’s shade of white or colour.
We build up the finish and polish it into the surrounding enamel.
The repair is left to cure, and most baths can be used the day after.

Before we arrive

Tell us about any previous repairs or coatings
Have somewhere for us to park nearby if possible
Let us know which floor the room is on

Get a quote

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.