Hampshire · England
Bath Repair in Segensworth
Bath repair in Segensworth without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- Damage beneath the taps
- A kit repair that didn’t last
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Segensworth customers choose us
- We leave the room as we found it
- Colour-matched on site
- One price list for the entire UK
- Work done at your home or business
Take a look at our prices page or guide to resurfacing and replacement costs.
Bath repair at your home in Segensworth
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. We regularly repair pressed steel enamel, cast iron enamel and roll-top & freestanding, and the jobs we see most are snagging damage from a refit and chips along the edge of the bath.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Segensworth (PO15, SO31)
- Region
- Hampshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Looking after it afterwards
It’s all simple stuff:
- Avoid scourers, wire wool and gritty cream cleaners
- Have new chips seen to early
- Keep metal cans and razors off the surface
- Ensure an acrylic bath is firm underfoot
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Segensworth questions
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Do you cover the entire of Hampshire?
The entire UK, including all of Hampshire. Just include your postcode and we will offer you dates.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Something went through my bath. Can it be fixed?
Generally. Photos of the hole and the underside help us check.
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Do you work in Segensworth?
Yes, we do. We send a technician to Segensworth for every job, and the price is the same as everywhere else.
How it works
You don’t need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It typically takes a few hours, and you can get on with other things while we’re there.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the following day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
Ask for a price
To get a price, send two or three pictures through our quote form or call us. We will say immediately whether it can be repaired.
Read more
Where we work around Segensworth
Segensworth is about 3 miles north-west of Fareham, in Hampshire. Our repair technicians come to homes and businesses in Segensworth and the surrounding area, so you do not need to take anything anywhere. We work in 683 places across Hampshire, from the larger towns to small villages. Our nearest city page is London, about 66 miles away.
Our technicians cover all of PO15 and SO31. We regularly work on streets such as Witherbed Lane, Brunel Way and Concorde Way and the roads around them. We also travel to Titchfield Park (1 mile south), Park Gate (1 mile west), Locks Heath (1 mile south-west), Whiteley (1 mile north) and Titchfield Common (1 mile south-west). Within a short drive, we also cover Winchester (13 miles north), Gosport (6 miles south-east), Havant (11 miles east), Eastleigh (8 miles north-west), Fareham (3 miles south-east) and Horndean (11 miles east).
Around Segensworth
Locally, our jobs take us to homes close to The Henry Cort Community College, St John and Cornerstone CofE (VA) Primary School, among other places. The closest station to Segensworth is Swanwick station, roughly 0.9 miles north-west. A little further out are Fareham Community Hospital (1.2 miles west) and St Andrew's Castle (3.2 miles west). Green spaces nearby include Swanwick Lakes.
Work for landlords and builders
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
What we cannot put right
A repair is not right for every job, including:
- Flexing caused by a failed cradle or loose feet
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we look at:
- The material
- How many areas need work
- The colour and finish to match
- Previous DIY repairs that have to come out
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- The material, if you know it
- Where you are, by postcode
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Nearby places to Segensworth
More services for Segensworth
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
