Staffordshire · England
Bath chip & crack repair in Stadmorslow, Staffordshire
Problem with your bath in Stadmorslow? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Chips under the taps
- Cracks in an acrylic bath
Repair or replace in Stadmorslow?
Replacing a fitted bath generally means a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it deals only with the damage in a single visit. Our bath repair starts from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
What you get with us
- Technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- Everything repaired in place
- Generally one visit, start to finish
Read our full price list or resurfacing vs replacement cost guide.
About our bath repair in Stadmorslow
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We regularly repair whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and common reasons people get in touch are a hole punched through by something heavy and chips caused by builders.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Stadmorslow (ST8, ST7)
- County
- Staffordshire
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Stadmorslow
Other services in Stadmorslow
How it works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes a morning or an afternoon.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the day after, the bath is ready to use.
Getting ready for the visit
- Clear the area around the damage
- Let us know about parking or access
- Let us know which floor the room is on
Get a quote
Send us photos of the damage and a wider shot of the entire item, with your ST8 postcode, and we’ll reply with a fixed price.
Advice
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
How we price bath repair
Prices start from £95. There is no charge for travel to Stadmorslow. The price comes down to:
- Unusual colours or finishes
- Doing more than one item at once
- The material
- Whether old repairs or coatings need taking off
A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with no extras added later.
Quotes from your photos
Almost every job we do is priced from pictures. This is what we need:
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Questions from Stadmorslow
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How long does the repair take to cure?
Typically within a day, though it depends on what we’ve done.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Honest limits
To be straight with you, some problems need a different fix:
- Wear across the entire surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that moves underfoot, until its support is fixed
Send us pictures and we will tell you honestly.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Aftercare tips
Simple care helps the repair last. We recommend:
- A dripping tap stains enamel, so fix it early
- Avoid scourers, wire wool and gritty cream cleaners
- Check that an acrylic bath does not move when you stand in it
- Put a towel in the bath if you’re working above it
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Stadmorslow and nearby
Stadmorslow is about 2 miles south-west of Biddulph, in Staffordshire. We visit homes and businesses in Stadmorslow and nearby villages, so you don’t need to take anything anywhere. Stadmorslow is one of 512 towns and villages in Staffordshire where we work. We work right across the region, from Stadmorslow to Manchester (26 miles away).
Our visits in ST8 and ST7 are booked in the same way as anywhere else. We also cover the places around Stadmorslow: Bemersley Green (1 mile south-east), Ridgeway (1 mile south-east), Chell (2 miles south), Brown Edge (2 miles south-east) and Norton le Moors (3 miles south-east). Larger places within reach include Newcastle-under-Lyme (6 miles south), Longton (8 miles south), Stone (14 miles south), Leek (7 miles east), Alsager (5 miles west) and Cheadle (11 miles south-east).
Near you in Stadmorslow
Typical jobs here are in homes near Biddulph High School, Packmoor Ormiston Academy and St James the Apostle. For rail, the closest station is Kidsgrove station, roughly 2.3 miles west. Well-known places in the area include Haywood Hospital (2.6 miles south) and Mow Cop Chapel Museum (1.4 miles north-west). Open spaces near Stadmorslow include Bignall Hill and Limekiln Wood Nature Reserve.
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
