Gloucestershire · England
Bath Repair for Stancombe homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Stancombe and across Gloucestershire. Free, fixed quotes from your pictures.
- Repairs from £95
- Scuffs and scratches in the surface
- Rusty patches near the plughole
When we would advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
Send us pictures and we’ll tell you honestly.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
How we handle bath repair in Stancombe
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Typical jobs include impact holes in acrylic and chips under the taps, across pressed steel enamel, roll-top & freestanding and whirlpool & spa baths.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Stancombe (GL6)
- Region
- Gloucestershire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Nearby places to Stancombe
What else we do in Stancombe
Stancombe questions
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Are there extra charges for Stancombe?
There is no separate call-out charge. Your fixed quote includes everything.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Do you cover Stancombe?
Yes. We work across the UK and come to Stancombe. Send us photos for a fixed quote, or call 0345 017 0787.
What does bath repair cost?
Prices start from £95. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your GL6 postcode.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help.
Where we work around Stancombe
Stancombe is about 4 miles east of Stroud, in Gloucestershire. Wherever you are in the GL6 postcode area, we carry out the work at your property. Stancombe is one of 470 towns and villages in Gloucestershire where we work. Our nearest city page is Birmingham, about 50 miles away.
Every address in GL6 is within our area. You will find streets such as Stancombe Lane and Bisley Road, and we cover them all. If you’re just outside Stancombe, we cover Bisley (1 mile south-east), Battlescombe (1 mile south-east), Slad (2 miles west), Eastcombe (2 miles south) and The Camp (2 miles north-east). Further out, we also cover Cheltenham (10 miles north), Gloucester (7 miles north-west), Stroud (4 miles west), St Paul's (10 miles north), Cirencester (9 miles south-east) and Lansdown (10 miles north).
Around Stancombe
Locally, our jobs take us to homes close to Thomas Keble School, Snows Farm Nature Reserve and The Bear Inn, among other places. Other local landmarks include Church of All Saints (0.7 miles south-east) and Bisley Blue Coat Church of England Primary School (0.7 miles south-east). The closest station to Stancombe is Stroud station, about 3.2 miles west of the centre. A little further out are Arcade Archive (2.9 miles south) and Stroud General Hospital (2.8 miles south-west). Green spaces nearby include Siccaridge Wood and Cooper's Hill.
Repairing versus replacing in Stancombe
Replacing a fitted bath usually means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Repairs from £95, with every job priced individually. Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why us?
- One-year guarantee on every repair
- Honest advice, even when it means no job
- Colour-matched on site
- Everything repaired in place
Take a look at our full price list and resurfacing vs replacement cost guide.
How we price bath repair
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- What the surface is made of
- Any earlier repairs that need removing first
- How hard the colour is to match
- How easy the damage is to reach
A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- Your postcode, so we can check dates
- Natural light rather than flash
- What it’s made of, if you know
- A wider photo showing the whole bath
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Landlord and trade work in Stancombe
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
For anyone letting property in or around Stancombe, we will quote for several properties at once. Send photos for each one and we will price them together.
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a morning or an afternoon. If anything looks different from your pictures, we will talk to you before going ahead.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the following day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Cover the bath during DIY or decorating
- Fix dripping taps early to stop staining and limescale
- Do not scrub with anything abrasive
- Store metal items away from the bath
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
About our accreditations · Every repair comes with a one-year guarantee.
